Brute Networks
Brute Networks 8GB DDR4-2133 ECC SODIMM 2Rx8 1.2V PC4-17000 01AG819-BN
8GB DDR4-2133 ECC SODIMM module with CL15 latency and 1.2V operation for compatible Lenovo systems
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- Lenovo-compatible ECC SODIMM validated for 01AG819 systems
- 8 GB DDR4 2133 MHz CL15 expands server capacity
- 2 V operation reduces power draw per module
- 2Rx8 dual-rank layout increases memory density
- Major-brand Samsung, SK Hynix or Micron ICs ensure reliability
Lenovo-Compatible 8GB DDR4 SODIMM
This 8GB DDR4 SODIMM is built to Lenovo part number 01AG819 and runs at 2133MHz with CL15 latency. It operates at 1.20V and uses a 2Rx8 unregistered ECC configuration on a 288-pin module. Brute Networks supplies it with major-brand chips from Samsung, SK Hynix or Micron.
For servers needing ECC SODIMM upgrades
It suits administrators replacing or adding memory in compatible Lenovo systems that require unbuffered ECC SODIMMs at this speed and rank. It does not suit builders who need registered DIMMs, non-ECC modules, higher frequencies or capacities beyond 8GB per stick.
Verify slot type and maximum module count
Confirm the target system accepts 288-pin DDR4 SODIMMs and supports unregistered ECC at 1.20V. Check the motherboard or server manual for the maximum number of populated slots and any rank-per-channel limits before ordering.
Fordele
- Lenovo-compatible ECC SODIMM validated for 01AG819 systems
- 8 GB DDR4 2133 MHz CL15 expands server capacity
- 2 V operation reduces power draw per module
- 2Rx8 dual-rank layout increases memory density
- Major-brand Samsung, SK Hynix or Micron ICs ensure reliability
Specifikationer
| Brand | Lenovo |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Spørgsmål om denne vare
Will this 288-pin DDR4 SODIMM fit in a laptop slot that takes 260-pin modules?
No — the module uses a 288-pin DDR4 interface, which is physically different from the 260-pin SODIMM slots found in most laptops. It requires a system with 288-pin DDR4 slots.
Can I mix this 2Rx8 ECC module with existing 1Rx8 non-ECC sticks in the same server?
Mixing ranks and ECC types is not recommended; the server will typically disable ECC and may run at the lowest common speed, reducing reliability.
How can I confirm the module is running at DDR4-2133 CL15 1.20 V after installation?
Check the BIOS or UEFI memory information screen — it should report 2133 MT/s, CAS latency 15, and 1.20 V for the installed module.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



