Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR3 ECC registered DIMMs with gold contacts

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1333 ECC Registered Memory Upgrade - B21

SKU CH-B8D9-PFCYS

16 GB dual-channel ECC registered DDR3 kit validated for the HP Z800 workstation

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • ECC Registered design prevents data errors for server reliability
  • 16GB kit (2×8GB) expands Z800 workstation memory capacity
  • DDR3-1333 speed with automatic down-clocking to 1066MHz or 800MHz
  • 240-pin DIMM fits 12 Z800 sockets for flexible upgrades
  • CL9 latency at 1.5V delivers stable registered performance

16GB DDR3-1333 ECC Registered Kit

This 16GB kit contains two 8GB DDR3-1333 registered ECC DIMMs built for the HP Z800 workstation. Each module runs at 1.5V with CL9 9-9-9 timing and uses a 2Rx4 organisation. The 240-pin form factor fits the Z800’s twelve memory sockets directly.

Suits Z800 owners adding ECC registered capacity

Buyers needing unbuffered ECC or non-ECC UDIMMs cannot use this kit because the Z800 requires registered modules for capacities above 48GB. Systems limited to 1066MHz or 800MHz by processor choice will still accept the DIMMs, but they will clock down automatically. Workstations other than the Z800 are not validated for this part.

Registered ECC stabilises multi-DIMM loads

Under sustained workloads the registered buffer reduces electrical loading on the memory controller, allowing all twelve sockets to be populated without signal degradation. The modules automatically drop to 1066MHz or 800MHz when the installed processor or population rules demand it, preventing instability during long compute sessions.

Fordele

  • ECC Registered design prevents data errors for server reliability
  • 16GB kit (2×8GB) expands Z800 workstation memory capacity
  • DDR3-1333 speed with automatic down-clocking to 1066MHz or 800MHz
  • 240-pin DIMM fits 12 Z800 sockets for flexible upgrades
  • CL9 latency at 1.5V delivers stable registered performance

Specifikationer

BrandComputer Memory Solutions
ModelCM10247210600ECCR2R4H
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemHp/Compaq Workstation Z800
Package Content2 Memory RAM Sticks

Spørgsmål om denne vare

Do I need a Xeon X5550 or higher processor for the 1333 MHz speed to be active?

Yes, the 1333 MHz speed requires a Xeon X5550 or higher processor; with lower models the modules will clock down to 1066 MHz or 800 MHz depending on the CPU and how many DIMMs are installed.

Can I keep my existing 800 MHz DDR3 modules and add this 1333 MHz kit?

The kit will automatically clock down to match the slowest installed modules, so it will run at 800 MHz alongside older DDR3 memory in the Z800.

How can I confirm the kit is running in registered ECC mode after installation?

Check the BIOS memory configuration or use a system information tool; it should report 16 GB of DDR3-1333 registered ECC memory operating at 1.5 V with CL9 timings.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.