Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR4 2666 CL19 288-Pin OptiPlex 5060/5070 D22
16GB dual-channel DDR4 2666 kit validated for OptiPlex 5060 and 5070 systems
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Timing19-19-19
- Voltage1.2V
- Guaranteed Dell OptiPlex 5060 and 5070 compatibility
- 16GB dual-channel kit for up to 64GB total
- 2666MHz DDR4 speed rated at PC4 21300
- Low 1.2V operation with CL19 timing
- 288-pin unbuffered non-ECC DIMM modules
System-Specific DDR4 Kit for OptiPlex 5060 and 5070
This 16 GB kit contains two 8 GB unbuffered DIMMs built for Dell OptiPlex 5060 and 5070 systems in both small form factor and tower chassis. It delivers 2666 MHz DDR4 speed with CL19 timing at 1.2 V. The modules use major-brand chips and carry no heat spreader.
Verify Slot Count and Maximum Capacity Before
The supported platforms provide two DIMM sockets and a 64 GB ceiling, so this pair fills every slot. Confirm your motherboard revision matches the listed OptiPlex models and that the BIOS recognises non-ECC unbuffered DDR4. Buyers needing more than two modules or ECC functionality cannot use this kit.
Steady Operation at Rated Frequency Without Active
Running continuously at 2666 MHz and 1.2 V, the unbuffered 2Rx8 modules rely on case airflow rather than a spreader. Sustained workloads keep the sticks at standard JEDEC thermal limits because the voltage and density remain modest. Systems with restricted internal airflow should still ensure adequate circulation across the memory area.
Fordele
- Guaranteed Dell OptiPlex 5060 and 5070 compatibility
- 16GB dual-channel kit for up to 64GB total
- 2666MHz DDR4 speed rated at PC4 21300
- Low 1.2V operation with CL19 timing
- 288-pin unbuffered non-ECC DIMM modules
Specifikationer
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM1024642666DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Timing | 19-19-19 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell OptiPlex 5060 Small Form Factor (SFF) / Tower, OptiPlex 5070 Small Form Factor (SFF) / Tower |
| Package Content | 2 Memory Ram Sticks |
Spørgsmål om denne vare
Does the box contain anything besides the two 8 GB sticks?
The package contains only the two 288‑pin DDR4 modules; no heat spreaders, cables or tools are included.
Should I choose the 16 GB kit or a single 8 GB module for my OptiPlex 5060?
The OptiPlex 5060 has two slots and supports up to 64 GB, so the 2 × 8 GB kit fills both slots and leaves room for future upgrades.
Will the CL19 timing at 2666 MHz slow down everyday tasks on a 5070 Tower?
At 1.2 V the modules run at the standard 2666 MT/s rate; CL19 is the native latency for this speed and will not create a noticeable bottleneck in typical office workloads.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.00133326BTC
På lager
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.00010146BTC
På lager