Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR4 DIMM sticks without heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM1024722400ECCNR 16GB (2x8GB) DDR4 2400 ECC DIMM

SKU CH-0MFX-DV1J7

ECC unregistered DDR4 kit with two 8 GB modules at 2400 MHz CL17 for Dell PowerEdge T30, T330 and Storage NX430 servers

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • ECC protection prevents data errors in Dell PowerEdge servers
  • 16 GB dual-channel kit matches 4-slot motherboard layout
  • DDR4 2400 MHz speed rated for 19200 MB/s bandwidth
  • Unregistered DIMM installs directly in T30, T330, NX430 systems
  • Low 1.2 V operation reduces power draw and heat

16 GB ECC kit for Dell PowerEdge servers

This 16 GB kit provides two 8 GB DDR4 2400 modules with ECC error correction and unregistered operation. It is built for the Dell PowerEdge T30, T330 and Storage NX430 platforms that require 288-pin DIMMs. The matched pair installs directly into the four available slots on those systems.

Thermals noise and power draw

Each module runs at 1.2 V without a heat spreader, keeping power consumption low in normal server workloads. Standard DDR4 signalling at CL17 17-17-17 timing produces minimal heat, so existing chassis airflow handles cooling silently. No additional fan speed or voltage adjustments are needed for typical use.

Upgrade path and when it matters

The kit expands a single-module configuration to dual-channel bandwidth and raises total capacity toward the 64 GB platform maximum. It is not for systems that require registered or load-reduced DIMMs, nor for boards limited to non-ECC memory. Buyers needing more than 16 GB per module or speeds above 2400 MT/s should look elsewhere.

Fordele

  • ECC protection prevents data errors in Dell PowerEdge servers
  • 16 GB dual-channel kit matches 4-slot motherboard layout
  • DDR4 2400 MHz speed rated for 19200 MB/s bandwidth
  • Unregistered DIMM installs directly in T30, T330, NX430 systems
  • Low 1.2 V operation reduces power draw and heat

Specifikationer

BrandComputer Memory Solutions
ModelCM1024722400ECCNR
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Poweredge T30, Poweredge T330, Storage NX430
Package Content2 Memory RAM Sticks

Spørgsmål om denne vare

How do I install the 288-pin DDR4 DIMMs in the four slots of a PowerEdge T30, and what step is often missed?

Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that all 16 GB are recognised at 2400 MHz.

What maintenance or replacement will the unbuffered ECC modules need over their service life?

No scheduled maintenance is required; the modules carry a limited lifetime warranty against manufacturing defects, so a failed stick would be replaced rather than serviced.

What limit appears first when the 2Rx8 kits run sustained workloads in a T330?

The platform maximum of 64 GB across four slots is reached before any memory-speed ceiling, so adding a second identical kit would hit the capacity limit first.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.