Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

Computer Memory Solutions

Computer Memory Solutions CM256646400DIMMDR 4GB 2x2GB DDR2 800 CL6

SKU CH-E75K-1N8TG

Two-module 4GB DDR2 kit rated at 800 MHz CL6 for select Intel motherboards

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 800 (PC2 6400)
  • CAS LatencyCL6
  • Timing6-6-6
  • Voltage1.8V
  • 4GB kit upgrades compatible Intel boards
  • Dual-channel 2x2GB layout boosts throughput
  • DDR2-800 CL6 timing matches spec
  • 8V unbuffered DIMMs install without config
  • 240-pin non-ECC design fits listed sockets

System-specific DDR2 kit

This 4GB kit from Computer Memory Solutions contains two 2GB modules built for Intel D946GZAB, D946GZIS, D975XBX2 and DB43LD motherboards. It runs at DDR2 800 (PC2 6400) with CL6 6-6-6 timings at 1.8V. The unbuffered non-ECC DIMMs use a 240-pin layout and major-brand chips.

Upgrade path for legacy Intel boards

Owners of the listed Intel desktop boards who need to reach the 8GB maximum across four slots can use this matched pair. Builders working with any other chipset, laptop, server or later DDR generation should look elsewhere because the pin-out, voltage and timing are specific to these platforms.

240-pin DDR2 800 interface

The decisive specification is the 240-pin DDR2 800 interface; only motherboards that accept PC2 6400 unbuffered non-ECC DIMMs at 1.8V will recognise and run these modules correctly.

Fordele

  • 4GB kit upgrades compatible Intel boards
  • Dual-channel 2x2GB layout boosts throughput
  • DDR2-800 CL6 timing matches spec
  • 8V unbuffered DIMMs install without config
  • 240-pin non-ECC design fits listed sockets

Specifikationer

BrandComputer Memory Solutions
ModelCM256646400DIMMDR
Capacity4GB (2 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 800 (PC2 6400)
CAS LatencyCL6
Timing6-6-6
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemIntel D946Gzab, D946Gzis D975Xbx2, Db43Ld Motherboard
Package Content2 Memory RAM Sticks

Spørgsmål om denne vare

What speed does the DDR2 800 interface actually run at in this kit?

The two 2 GB modules are rated for 800 MHz DDR2, which is the PC2-6400 data rate.

Will these 240-pin DIMMs fit the four slots on an Intel D946GZIS board?

Yes, each stick is a standard 240-pin unbuffered DDR2 DIMM and the board has four such sockets.

Do I need to change any BIOS settings after installing the pair, or is it plug-and-play at 1.8 V?

The kit runs at the standard 1.8 V DDR2 voltage, so most boards will detect the correct 6-6-6 timings automatically.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.