Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green printed circuit board SODIMM module with gold edge connector and black memory chips

Computer Memory Solutions

Computer Memory Solutions CM512MBPC2700100PIN 512MB DDR 333 PC2700 SODIMM memory upgrade

SKU CH-6ZZN-95XX7

512 MB DDR 333 PC2700 100-pin SODIMM upgrade for Lexmark C935 and E260 printers

  • Capacity512MB
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Timing3-3-3
  • Voltage2.5V
  • ECCNo
  • 512 MB capacity expands Lexmark printer memory
  • DDR 333 PC2700 speed matches system requirements
  • CL2.5 timing optimises data access
  • Unbuffered non-ECC design fits Lexmark C935 and E series
  • 100-pin SODIMM form factor installs directly into printer slots

512MB DDR 333 SODIMM module

This 512MB DDR 333 (PC2700) SODIMM runs at 2.5V with CL2.5 timing. It is an unbuffered, non-ECC stick built with major-brand chips and no heat spreader. The module uses a 100-pin SODIMM form factor and is sold as a single-piece upgrade kit. Condition is new.

Suits Lexmark C935 and E-series printers

Designed for Lexmark C935Dn, C935Dtn, C935Hdn, E260N and E460Dn machines that accept 100-pin DDR SODIMMs. Buyers needing ECC or registered memory should look elsewhere, as this stick is neither. It also will not fit systems requiring 144-pin or 200-pin SODIMM slots.

512MB per slot, two slots maximum

Each socket accepts up to 512MB, giving a total ceiling of 1GB across the two available slots. This module fills one slot at the maximum per-socket capacity. Installing two such sticks reaches the platform limit; adding more memory beyond 1GB is not supported by the host device.

Fordele

  • 512 MB capacity expands Lexmark printer memory
  • DDR 333 PC2700 speed matches system requirements
  • CL2.5 timing optimises data access
  • Unbuffered non-ECC design fits Lexmark C935 and E series
  • 100-pin SODIMM form factor installs directly into printer slots

Specifikationer

BrandComputer Memory Solutions
ModelCM512MBPC2700100PIN
Capacity512MB
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Timing3-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemLexmark C935Dn, C935Dtn, C935Hdn, E260N, E460Dn
Package Content1 Memory RAM Stick

Spørgsmål om denne vare

Which Lexmark printer models accept this 100-pin DDR 333 SODIMM?

This module is compatible with Lexmark C935Dn, C935Dtn, C935Hdn, E260N and E460Dn printers that use 100-pin DDR SODIMM slots.

Will this 512 MB stick work if the printer already has a different brand of PC2700 memory installed?

Yes, it can run alongside another brand of PC2700 333 MHz unbuffered SODIMM as long as the printer has a free 100-pin slot.

How can I verify the new memory is recognised after installation?

Print a configuration page from the printer menu; the reported memory total should increase by 512 MB.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.