Crucial
Crucial BX500 2000GB 2.5 SATA internal SSD
A 2.5-inch SATA internal SSD holding 2000 GB, delivering up to 540 MB/s read speed and 300% faster performance than a typical hard drive
- Faster boot and file loading with SATA speeds up to 540MB/s
- 300% faster responsiveness than a typical hard drive
- 45x more energy efficient than a typical hard drive for longer battery life
- Micron 3D NAND technology backed by 40 years of memory innovation
- 2000GB capacity in a 2.5-inch form factor for easy laptop or desktop upgrades
2.5-inch SATA SSD for system refresh
The Crucial BX500 is a 2000GB internal solid-state drive that connects through a standard SATA interface. It uses Micron 3D NAND technology to deliver sequential read speeds up to 540MB/s. The drive is designed to replace a mechanical hard drive in a laptop or desktop computer.
Upgrade path for SATA bays.
This drive suits owners of older laptops or desktops that only accept a 2.5-inch SATA device. It also fits builders who want a large-capacity storage volume without moving to a different connector type. Buyers whose systems lack a SATA port or a 2.5-inch bay should look at a different form factor.
540MB/s sequential read over SATA
The headline specification is the 540MB/s maximum sequential read speed across the SATA link. That figure determines whether the drive can saturate the host controller in a typical refresh scenario. If the platform requires higher throughput than the SATA bus provides, this model will not meet the performance target.
Fordele
- Faster boot and file loading with SATA speeds up to 540MB/s
- 300% faster responsiveness than a typical hard drive
- 45x more energy efficient than a typical hard drive for longer battery life
- Micron 3D NAND technology backed by 40 years of memory innovation
- 2000GB capacity in a 2.5-inch form factor for easy laptop or desktop upgrades
Specifikationer
Der er endnu ikke offentliggjort specifikationer for denne vare.
Spørgsmål om denne vare
Does my laptop or desktop need a 2.5 SATA drive bay and a SATA data cable for this 2000GB drive?
Yes, the drive uses a standard 2.5 SATA interface, so the system must provide a 2.5-inch bay or caddy plus a SATA data and power connection.
Will this SATA SSD work if I keep my older mechanical hard drive as a secondary drive?
The drive connects over SATA like a traditional hard drive, so it can coexist with an older HDD on the same controller without protocol conflicts.
How can I verify the drive is delivering the advertised 540MB/s read speed after installation?
Run a sequential-read benchmark such as CrystalDiskMark; a result near 540 MB/s confirms the drive is operating at its rated SATA performance.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
