DELL
DELL 381CG 8TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive
An 8 TB 3.5-inch SAS 12 Gb/s hard drive spinning at 7200 RPM for high-capacity nearline storage
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity8TB
- RPM7200 RPM
- Form Factor3.5"
- 8 TB capacity stores massive datasets
- 7200 RPM spindle delivers responsive throughput
- SAS 12Gb/s interface enables fast host transfers
- 5-inch form factor fits standard drive bays
- Dell part 381CG ensures verified compatibility
Dell 381CG 8 TB SAS hard drive
This Dell 381CG drive provides 8 TB of storage in a 3.5 inch form factor. It spins at 7200 RPM and connects through a SAS 12Gb/s interface. The unit is supplied as a bare drive without a tray. It is built for nearline workloads that demand sustained throughput.
Ideal for servers and storage arrays needing SAS
This drive suits administrators expanding Dell PowerEdge or compatible SAS backplanes where 12 Gb/s bandwidth is available. It is not for systems that lack a SAS controller or that accept only 2.5 inch bays. Desktop boards without enterprise drive support should look elsewhere.
SAS 12Gb/s interface determines compatibility
The single specification that decides fit is the SAS 12Gb/s interface; the host must provide a matching controller and backplane. Capacity of 8 TB and 7200 RPM speed follow once the interface requirement is met. Verify controller and firmware support before purchase.
Fordele
- 8 TB capacity stores massive datasets
- 7200 RPM spindle delivers responsive throughput
- SAS 12Gb/s interface enables fast host transfers
- 5-inch form factor fits standard drive bays
- Dell part 381CG ensures verified compatibility
Specifikationer
| Brand | Dell |
|---|---|
| Model | 381CG |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Spørgsmål om denne vare
What controller or backplane do I need to run this 12 Gb/s SAS drive?
A SAS host-bus adapter, RAID controller or server backplane that supports 12 Gb/s SAS is required for the 381CG to operate.
Will this 7.2K Nearline SAS drive work in a system that currently uses 7.2K SAS drives?
Yes, the 381CG uses the same 12 Gb/s SAS interface and 7.2K spindle speed, so it will integrate with existing 7.2K SAS volumes.
How can I verify the 381CG is running at 12 Gb/s after installation?
Check the negotiated link speed in your RAID controller BIOS or OS utility; it should report 12 Gb/s for this drive.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



