DELL
DELL 400-AHNE 1.2TB 2.5" SAS 10K 12Gb/s internal hard drive
A 1.2TB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s interface for hot-swap server bays
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity1.2TB
- RPM10000 RPM
- Average Latency12Gb/s
- Form Factor2.5"
- 2 TB capacity for data-intensive workloads
- 10 000 RPM spindle speed for fast access
- SAS 12 Gb/s interface for high throughput
- 5 inch form factor fits dense server bays
- Hot-swap tray enables drive changes without downtime
Dell 400-AHNE 1.2TB SAS Drive
The Dell 400-AHNE is a 1.2TB 2.5-inch internal hard drive with a SAS 12Gb/s interface spinning at 10000 RPM. It is supplied as a bare drive with hot-swap capability for direct integration into compatible bays. This enterprise-class HDD targets servers and storage arrays needing high-throughput rotational storage.
Enterprise SAS Storage Upgrade
This drive suits administrators expanding Dell PowerEdge or compatible SAS backplanes that accept 2.5-inch 10K spindles. Buyers whose controllers lack 12Gb/s SAS ports or who require solid-state latency should look elsewhere. Systems limited to 3.5-inch bays without adapters cannot use this form factor.
12Gb/s SAS Interface Decides Fit
The single specification that decides compatibility is the 12Gb/s SAS interface paired with the 2.5-inch hot-swap form factor. A backplane or HBA must support this exact signalling rate and physical connector. Without that match the drive will not function regardless of capacity or spindle speed.
Fordele
- 2 TB capacity for data-intensive workloads
- 10 000 RPM spindle speed for fast access
- SAS 12 Gb/s interface for high throughput
- 5 inch form factor fits dense server bays
- Hot-swap tray enables drive changes without downtime
Specifikationer
| Brand | Dell |
|---|---|
| Model | 400-AHNE |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 2.5" |
Spørgsmål om denne vare
Does the 400-AHNE arrive with a tray or cables, or must I supply them?
The unit is listed as a bare drive with hot-swap tray type, so a compatible 2.5" SAS tray and cables are required separately.
Is the 1.2TB 10K 12Gb/s SAS model the only capacity offered for this part number?
The 400-AHNE is specified at 1.2TB capacity; other capacities would carry different Dell part numbers.
What sustained throughput can I expect from the 12Gb/s SAS interface inside a server backplane?
The 12Gb/s SAS link supports up to 12Gb/s transfer rate; actual sustained throughput depends on the 10000 RPM mechanics and the host controller.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
