DELL
DELL 400-ASIB 8TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive
8 TB 3.5-inch SAS 12 Gb/s 7200 RPM internal hard drive with hot-swap tray
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity8TB
- RPM7200 RPM
- Form Factor3.5"
- 8 TB capacity stores large datasets
- SAS 12Gb/s interface enables fast data transfers
- 7200 RPM spindle speed delivers responsive performance
- 5 inch form factor fits standard drive bays
- Hot-swap tray allows drive replacement without downtime
Dell 400-ASIB 8 TB SAS drive
The Dell 400-ASIB is an 8 TB nearline SAS hard drive built for servers and storage arrays that need high-capacity bulk storage. It fits 3.5-inch hot-swap bays and connects through a 12 Gb/s SAS interface for direct attachment to RAID controllers or backplanes.
Capacity and throughput limits
Eight terabytes provides ample room for archives, backups and large media libraries on a single spindle. The 7200 RPM platters deliver sustained throughput suited to sequential workloads, while random I/O performance will saturate well before the 12 Gb/s link in multi-user database or virtualisation scenarios.
Hot-swap tray and bare-drive delivery
A hot-swap carrier allows drive replacement without powering down the chassis, reducing service windows in rack environments. The drive ships as a bare unit without cables or mounting screws, so installers must confirm tray compatibility with their specific Dell enclosure or server model.
Fordele
- 8 TB capacity stores large datasets
- SAS 12Gb/s interface enables fast data transfers
- 7200 RPM spindle speed delivers responsive performance
- 5 inch form factor fits standard drive bays
- Hot-swap tray allows drive replacement without downtime
Specifikationer
| Brand | Dell |
|---|---|
| Model | 400-ASIB |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Spørgsmål om denne vare
Will the 400-ASIB drive work in a server that only has 6 Gb/s SAS backplanes?
The drive uses a 12 Gb/s SAS interface and will negotiate down to 6 Gb/s on older backplanes, so it will function but at the lower speed.
How can I verify the 7200 RPM spindle speed is active after installation?
Check the drive's reported rotational speed in the RAID controller BIOS or use a SMART monitoring tool that displays the nominal RPM value.
Does the bare drive include a hot-swap tray or must I supply my own?
The unit is shipped as a bare drive without a tray; you will need a compatible 3.5" hot-swap carrier for your chassis.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



