DELL
DELL 400-ATJQ 1.20 TB 2.5" 10000 rpm SAS internal hard drive
A 1.20 TB internal hard drive with a 10000 rpm spindle speed and 12Gb/s SAS interface in a 2.5 inch form factor
- NAND Flash Memory TypeHard Drive
- 20 TB capacity stores large datasets
- 10000 rpm spindle speed accelerates data access
- 12Gb/s SAS interface enables fast transfers
- 5 inch form factor fits dense server bays
- Internal drive design integrates directly into chassis
Dell 400-ATJQ 1.20 TB SAS hard drive
This Dell 400-ATJQ is a 1.20 TB internal hard drive with a 10000 rpm spindle speed and a 2.5 inch form factor. It connects via a SAS interface operating at 12Gb/s SAS. The drive is supplied new and intended for desktop internal storage.
Suited for SAS bays needing 10k speed
This drive suits systems that accept a 2.5 inch SAS device and require 10000 rpm performance. Builders whose chassis or controller only supports a different interface or form factor cannot use this unit. Buyers needing a larger capacity than 1.20 TB should consider other options.
12Gb/s SAS interface
The drive interface standard is 12Gb/s SAS, which determines host compatibility. Verify that your backplane or controller supports this exact specification before purchase.
Fordele
- 20 TB capacity stores large datasets
- 10000 rpm spindle speed accelerates data access
- 12Gb/s SAS interface enables fast transfers
- 5 inch form factor fits dense server bays
- Internal drive design integrates directly into chassis
Specifikationer
| Brand | Dell |
|---|---|
| NAND Flash Memory Type | Hard Drive |
Spørgsmål om denne vare
Will the 12Gb/s SAS 2.5" 10000 rpm drive work in a server that only has 6Gb/s SAS backplanes?
The drive uses the 12Gb/s SAS interface and will negotiate down to 6Gb/s on older backplanes, so it will function but at the lower speed.
How can I confirm the 400-ATJQ is running at its full 12Gb/s link speed after installation?
Check the controller BIOS or OS utility such as smartctl; it should report a negotiated link speed of 12Gb/s for this drive.
Does the 1.20 TB 400-ATJQ ship with a 2.5" to 3.5" adapter bracket or mounting screws?
The drive is supplied as a bare 2.5" unit; any adapter bracket or screws required for your chassis must be purchased separately.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
