DELL
DELL AL14SEB18EQY 1.8TB 10000RPM 12Gbps 2.5" SAS internal hard drive
Stores 1.8 TB on a 2.5 inch SAS drive spinning at 10000 RPM with 128 MB cache
- 8 TB capacity stores large enterprise datasets
- 10000 RPM spindle speed accelerates transaction workloads
- 12 Gb/s SAS interface delivers high-throughput connectivity
- 128 MB cache buffers burst I/O operations
- 5 inch hot-swap form factor enables tool-less drive replacement
Capacity and speed
This Dell enterprise drive delivers 1.8TB of storage on a 2.5-inch SAS 12Gb/s interface spinning at 10000RPM with a 128MB buffer. It is built for hot-swap bays in servers and storage arrays that demand consistent throughput.
Suited for high-throughput arrays.
The 10000RPM spindle suits database volumes, virtualisation hosts and tiered storage pools where random I/O matters. Buyers needing silent operation, laptop upgrades or USB-attached backup should look elsewhere because the drive requires a SAS backplane and enterprise cooling.
Verify SAS controller and bay clearance
Confirm your controller or HBA supports 12Gb/s SAS and that the 2.5-inch hot-swap carrier matches your chassis tray. Check firmware compatibility lists for the array and ensure the power supply can sustain the spin-up current of multiple drives.
Fordele
- 8 TB capacity stores large enterprise datasets
- 10000 RPM spindle speed accelerates transaction workloads
- 12 Gb/s SAS interface delivers high-throughput connectivity
- 128 MB cache buffers burst I/O operations
- 5 inch hot-swap form factor enables tool-less drive replacement
Specifikationer
Der er endnu ikke offentliggjort specifikationer for denne vare.
Spørgsmål om denne vare
What controller or backplane is required for the 12Gbps SAS interface on this drive?
A SAS controller or backplane that supports 12Gbps SAS is needed to connect the drive and achieve its rated interface speed.
Can this 12Gbps SAS drive operate in a chassis or controller limited to 6Gbps SAS?
Yes, the drive will negotiate down to 6Gbps SAS when connected to a 6Gbps controller or backplane, though maximum throughput will be limited to that speed.
How can I verify the drive is running at 10000RPM and 12Gbps after installation?
Check the controller BIOS or management utility; it should report the drive model AL14SEB18EQY with a 10000RPM spindle speed and a negotiated 12Gbps link rate.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



