EDGE Tech
EDGE Tech CLX600 mSATA 500GB internal SSD
A 500 GB mSATA internal SSD with a SATA 6 Gb/s interface and 2.10 W active power draw
- Device TypeInternal
- Form FactormSATA
- Capacity500GB
- Power Consumption (Active)2.10 W
- Height0.1"
- Width1.2"
- 500GB capacity stores large libraries and workloads
- mSATA form factor fits slim laptops and embedded boards
- SATA 6Gb/s interface delivers consistent throughput for everyday tasks
- Low 2.10W active draw extends battery life in mobile devices
- Compact 0.1" height suits space-constrained chassis
EDGE Tech CLX600 mSATA 500GB Internal SSD
The EDGE Tech CLX600 is a 500GB internal solid-state drive built in the mSATA form factor. It connects through a Sata 6Gb/s interface and draws 2.10 W when active. The drive measures 0.1" high, 1.2" wide and 2" deep, weighing 2.08 oz. Part number PE255091 identifies this model.
Suits systems with an mSATA slot needing Sata
This drive fits laptops, embedded boards or small-form-factor PCs that expose a native mSATA connector and expect Sata protocol. It will not work in M.2-only sockets or in systems that require a different physical interface.
Deciding specification: mSATA form factor
The single detail that determines compatibility is the mSATA form factor combined with the Sata 6Gb/s interface. Verify that the host device provides an mSATA slot wired for Sata signalling before purchase.
Fordele
- 500GB capacity stores large libraries and workloads
- mSATA form factor fits slim laptops and embedded boards
- SATA 6Gb/s interface delivers consistent throughput for everyday tasks
- Low 2.10W active draw extends battery life in mobile devices
- Compact 0.1" height suits space-constrained chassis
Specifikationer
| Brand | EDGE |
|---|---|
| Part Number | PE255091 |
| Device Type | Internal |
| Form Factor | mSATA |
| Capacity | 500GB |
| Power Consumption (Active) | 2.10 W |
| Height | 0.1" |
| Width | 1.2" |
| Depth | 2" |
| Weight | 2.08 oz |
Spørgsmål om denne vare
Does my laptop need an mSATA slot to install the CLX600 500GB drive?
Yes, the CLX600 uses the mSATA form factor, so the host system must provide a compatible mSATA socket that supports Sata 6Gb/s signalling.
Can the CLX600 500GB SSD run in a system that only has Sata 3Gb/s ports?
The drive is backward compatible with Sata 3Gb/s ports; it will operate at the slower link speed while still providing the full 500GB capacity.
How can I verify the CLX600 is performing at Sata 6Gb/s after installation?
Check the negotiated link speed in the BIOS or use a tool such as CrystalDiskInfo; it should report a Sata 6Gb/s connection for the PE255091.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
