Epoch
Epoch 400-ARUI 8TB 7200 RPM SATA 3.5" Internal Hard Drive Replacement Kit
8 TB, 7200 RPM SATA 3.5″ drive kit validated for Dell PowerEdge 14 and 15 generation servers
- InterfaceSATA
- Capacity8TB
- RPM7200 RPM
- UsageIdeal for Servers
- Form Factor3.5"
- 8 TB capacity stores large server datasets
- 7200 RPM spindle delivers fast sequential throughput
- SATA 6 Gb/s interface fits standard drive bays
- 5 inch form factor matches Dell PowerEdge 14G and 15G servers
- Replacement kit includes carrier for direct hot-swap installation
Epoch 400-ARUI 8TB 7200 RPM SATA Drive
The Epoch 400-ARUI is an 8TB 3.5-inch internal hard drive spinning at 7200 RPM with a SATA 6Gb/s interface. It ships as a replacement kit validated for Dell PowerEdge 14G and 15G rack and tower servers. The drive is new and built with genuine components for enterprise storage arrays.
Suited for server storage upgrades, not desktop PCs
This drive targets administrators expanding capacity in compatible Dell PowerEdge R240 through R940xa and T150 through T550 systems. Buyers needing a 2.5-inch form factor or a different interface cannot use this kit. Workstations without 3.5-inch bays should consider other options.
SATA 6Gb/s interface decides compatibility
The single specification that determines fit is the SATA 6Gb/s interface combined with the 3.5-inch form factor. Only servers listed in the 14G and 15G families support this exact drive kit. Verify the server model before purchase to ensure the drive will be recognised.
Fordele
- 8 TB capacity stores large server datasets
- 7200 RPM spindle delivers fast sequential throughput
- SATA 6 Gb/s interface fits standard drive bays
- 5 inch form factor matches Dell PowerEdge 14G and 15G servers
- Replacement kit includes carrier for direct hot-swap installation
Specifikationer
| Interface | SATA |
|---|---|
| Capacity | 8TB |
| RPM | 7200 RPM |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
Spørgsmål om denne vare
How much power does the 8TB 7200 RPM SATA drive draw under continuous server load?
The kit is built for Dell PowerEdge 14 and 15 generation servers where the backplane supplies standard 3.5-inch SATA power limits.
What server chassis or backplane must I already have to install this 3.5-inch SATA replacement kit?
It fits Dell PowerEdge 14G models such as R240 through R940xa and 15G models such as R250 through R7525 plus Tower T150 T350 T550.
Will the 6 Gb/s SATA interface negotiate down to 3 Gb/s on my older PowerEdge 14G backplane?
Yes, SATA 6 Gb/s is backward compatible so the drive will operate at the speed supported by the 14G or 15G controller.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
