GIGABYTE
GIGABYTE GA-B250M-DS3H rev. 1.0 LGA 1151 B250 Micro ATX Intel motherboard
Micro ATX board for LGA1151 CPUs with DDR4 memory support up to 2400 MHz and SATA connectivity
- Supports 7th and 6th generation Intel Core i7/i5/i3 processors via LGA 1151 socket
- DDR4 memory up to 2400 MHz with 7th generation CPU or 2133 MHz baseline
- Realtek ALC887 audio codec for integrated sound
- Micro ATX form factor measuring 226 mm by 193 mm
- Dual UEFI BIOS with APP Center utilities including Easy Tune
GIGABYTE GA-B250M-DS3H rev. 1.0 motherboard
This Micro ATX board uses the Intel B250 chipset and an LGA 1151 socket. It accepts 6th and 7th generation Intel Core i7, i5, i3, Pentium and Celeron processors. The platform is suited to office workstations and budget home builds that need a compact form factor.
Sustained operation with DDR4 memory
Four DIMM slots support dual-channel DDR4 at 2133 MHz. With a 7th generation processor installed, speeds up to 2400 MHz are available. The ALC887 codec handles audio during long sessions and the Dual BIOS design provides a backup firmware image if the primary image becomes corrupted.
Compatibility checks before ordering
Verify that your chassis accepts a 226 mm by 193 mm Micro ATX board. Confirm the CPU is a supported LGA 1151 model from the 6th or 7th generation families. Check that your power supply provides the necessary ATX connectors for this platform. Ensure any DDR4 modules match the supported speeds for your chosen processor.
Fordele
- Supports 7th and 6th generation Intel Core i7/i5/i3 processors via LGA 1151 socket
- DDR4 memory up to 2400 MHz with 7th generation CPU or 2133 MHz baseline
- Realtek ALC887 audio codec for integrated sound
- Micro ATX form factor measuring 226 mm by 193 mm
- Dual UEFI BIOS with APP Center utilities including Easy Tune
Specifikationer
Der er endnu ikke offentliggjort specifikationer for denne vare.
Spørgsmål om denne vare
How loud and hot does the GA-B250M-DS3H rev. 1.0 run during all-day operation?
The board uses passive heatsinks and the B250 chipset typically draws low power, so fan noise stays minimal and temperatures remain modest under continuous load.
Which processor must I already own to run DDR4 at 2400 MHz on this board?
A 7th generation Intel Core i7, i5, i3, Pentium or Celeron in the LGA1151 package is required; with a 6th generation CPU the memory tops out at 2133 MHz.
Will my existing SATA drives and DDR4 memory work straight away with the GA-B250M-DS3H rev. 1.0?
Yes, the board provides SATA 6Gb/s ports and four DDR4 slots supporting 2133 or 2400 MHz modules, so current drives and memory install without adapters.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



