HP
HP 693569-008 900GB 2.5" SAS 10000 RPM internal hard drive
A 900 GB 2.5 inch SAS hard drive spinning at 10000 RPM with hot-swap support
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity900GB
- RPM10000 RPM
- Average Latency6Gb/s
- Form Factor2.5"
- 900 GB capacity stores large datasets
- 10 000 RPM spindle enables fast data access
- SAS 6 Gb/s interface supports high throughput
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
HP 693569-008 900GB SAS Hard Drive
The HP 693569-008 is a new 900GB internal hard drive with a 2.5 inch form factor. It uses a SAS 6Gb/s interface and spins at 10000 RPM. The drive is supplied as a bare unit with hot-swap capability.
Suits SAS servers needing 10K spindle speed
This drive fits servers and storage arrays that accept 2.5 inch SAS drives and require 10000 RPM performance. Systems lacking SAS backplanes or controllers cannot use this drive. Buyers needing larger capacity or solid-state latency should consider a different drive class.
SAS 6Gb/s interface defines compatibility
The single specification that decides fit is the SAS 6Gb/s interface. The host must provide a matching SAS port and support 2.5 inch hot-swap trays for this drive to function.
Fordele
- 900 GB capacity stores large datasets
- 10 000 RPM spindle enables fast data access
- SAS 6 Gb/s interface supports high throughput
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Specifikationer
| Brand | HP |
|---|---|
| Model | 693569-008 |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 900GB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Spørgsmål om denne vare
What server or storage enclosure do I need to mount the 2.5-inch SAS 6Gb/s drive with part number 693569-008?
It fits any 2.5-inch hot-swap bay that accepts a SAS 6Gb/s connection and provides the correct backplane power and signal pins.
Will the 10000 RPM 900GB SAS drive work on an older 3Gb/s SAS controller?
Yes, the 6Gb/s SAS interface negotiates down to 3Gb/s automatically, so the drive will operate at the slower link speed.
How can I verify the drive is healthy and running at 10000 RPM after installation?
Check the SMART attributes and rotational-speed field in your RAID controller BIOS or OS disk utility; they should report 10000 RPM and no reallocated-sector warnings.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



