HP
HP 819199-001 8TB 3.5" SAS 7.2K 12Gb/s internal hard drive
An 8TB 3.5-inch SAS hard drive spinning at 7200 RPM with a 12Gb/s transfer rate and Smart Carrier tray
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity8TB
- RPM7200 RPM
- Average Latency6Gb/s
- Form Factor3.5"
- 8TB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential access
- 12Gb/s SAS interface supports high-throughput workloads
- 5-inch form factor fits standard drive bays
- Smart Carrier tray simplifies installation and status monitoring
8TB SAS drive for server arrays
The HP 819199-001 is an 8TB 3.5" internal hard drive built for SAS environments. It spins at 7200 RPM and connects through a 12Gb/s SAS interface. The Smart Carrier tray allows hot-swap installation in compatible HP bays. It suits administrators expanding bulk storage in rack or tower servers.
Thermals noise and power in normal use
Mechanical operation at 7200 RPM produces typical enterprise drive acoustics and heat output. Power draw follows standard 3.5" SAS patterns during sustained reads and writes. The bare-drive packaging assumes the chassis provides adequate airflow. No active cooling or acoustic dampening is included.
Smart Carrier tray simplifies deployment
The bundled Smart Carrier integrates the drive sled and status LEDs into one module. It enables tool-less insertion and removal while the system remains online. No additional mounting hardware, cables or management software are supplied. Compatibility depends on the server generation and backplane design.
Fordele
- 8TB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential access
- 12Gb/s SAS interface supports high-throughput workloads
- 5-inch form factor fits standard drive bays
- Smart Carrier tray simplifies installation and status monitoring
Specifikationer
| Brand | HP |
|---|---|
| Model | 819199-001 |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 3.5" |
Spørgsmål om denne vare
How do I install the 819199-001 drive into a server bay with the Smart Carrier?
Slide the 3.5" drive into the bay until the Smart Carrier latch clicks, then secure the latch screw if your chassis requires it; the SAS connector seats automatically with the carrier.
What maintenance or replacement will the 819199-001 need later?
As a 7200 RPM mechanical drive, the 819199-001 may eventually require replacement if bearing noise increases or SMART reallocated-sector counts rise.
What limit appears first on the 819199-001 during sustained writes?
The 12Gb/s SAS interface and 7200 RPM platters cap sustained throughput around the drive's native media transfer rate.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
