HP
HP MB4000GDMTH 4TB 7200RPM 3.5" SATA internal hard drive
A 4 TB 3.5 inch SATA desktop hard drive spinning at 7200 RPM, supplied with a Smart Carrier caddy
- 4 TB capacity stores large media libraries and backups
- 7200 RPM spindle speed delivers quick file access
- SATA 6 Gb/s interface enables fast data transfer
- 5 inch form factor fits standard desktop drive bays
- Includes Smart Carrier caddy for secure mounting
HP 4 TB SATA hard drive
This HP MB4000GDMTH is a 3.5-inch internal hard drive with 4 TB capacity, 7200 RPM spindle speed and a SATA 6 Gb/s interface. It ships new with zero hours and includes the HP Smart Carrier caddy tray for tool-less installation in compatible bays.
Suited for bulk storage in servers and workstations
The drive fits 3.5-inch hot-swap bays that accept the HP Smart Carrier tray, making it a direct replacement for part numbers 693720-001 and 693687-B21. Builders whose chassis uses fixed screw-mount trays or proprietary carrier systems will not be able to install this unit.
SATA 6 Gb/s interface and Smart Carrier tray
The single specification that determines compatibility is the SATA 6 Gb/s interface combined with the included Smart Carrier tray; the host system must provide a 3.5-inch SATA backplane and support the HP carrier form factor for the drive to seat and operate correctly.
Fordele
- 4 TB capacity stores large media libraries and backups
- 7200 RPM spindle speed delivers quick file access
- SATA 6 Gb/s interface enables fast data transfer
- 5 inch form factor fits standard desktop drive bays
- Includes Smart Carrier caddy for secure mounting
Specifikationer
Der er endnu ikke offentliggjort specifikationer for denne vare.
Spørgsmål om denne vare
How do I fit the included SMART CARRIER tray into a 3.5" bay?
Slide the drive into the tray until it clicks, then insert the assembly into the bay and secure it with the four side screws; the step often missed is tightening those screws evenly so the drive sits flush.
What part will need replacement first during long-term operation?
The mechanical spindle and actuator arms inside the 7200RPM mechanism wear over time; SMART attributes such as reallocated sector count will signal when the drive should be swapped.
Which limit appears first when the drive runs at full speed for hours?
Sustained 7200RPM operation generates heat that hits the thermal throttle point before the 6Gb/s SATA link saturates, so adequate case airflow is the practical ceiling.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
