Lenovo
Lenovo 49Y1415 8GB DDR3 1333 ECC Registered server RAM
8GB DDR3 1333 ECC registered server memory module with CL9 latency and 1.35V operation
- Capacity8GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- ECC protection prevents data corruption with registered design
- 8 GB capacity expands server memory for heavier workloads
- DDR3 1333 speed delivers 10600 MT/s bandwidth
- Low 1.35 V voltage reduces power draw and heat
- CL9 latency keeps response times tight for critical apps
Lenovo 8GB DDR3 Registered ECC
This Lenovo 49Y1415 module provides 8GB of DDR3 1333 memory with ECC and registered buffering. It operates at 1.35V with CL9 latency on a 240-pin form factor. The part is listed as refurbished and was first shown by the manufacturer in 2014. It suits servers and workstations that require registered ECC DDR3 memory.
Suits registered ECC DDR3 slots only
Systems needing unbuffered non-ECC modules cannot use this memory. Builders requiring speeds beyond the rated 1333 MT/s or a different DDR generation should select another part. The absence of a heat spreader may matter in dense configurations with restricted airflow.
Deciding spec: registered ECC DDR3
The registered buffer and ECC function together define platform compatibility. Only motherboards designed for registered ECC DDR3 will accept this module. Verify the platform documentation before purchase.
Fordele
- ECC protection prevents data corruption with registered design
- 8 GB capacity expands server memory for heavier workloads
- DDR3 1333 speed delivers 10600 MT/s bandwidth
- Low 1.35 V voltage reduces power draw and heat
- CL9 latency keeps response times tight for critical apps
Specifikationer
| Brand | Lenovo |
|---|---|
| Model | 49Y1415 |
| Capacity | 8GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Forsendelsesvægt | 0.45 kg |
| Pakkestørrelse | 254 × 203 × 51 mm |
Spørgsmål om denne vare
Will the 240-pin DDR3 modules need replacement if the server board requires a different voltage than 1.35V?
The modules run at 1.35V; if your board only accepts 1.5V DDR3 they will not be compatible and must be replaced with standard-voltage kits.
What speed ceiling appears first when the registered ECC sticks run continuously at DDR3 1333?
The CL9 latency at 1333 MT/s sets the throughput limit; sustained loads cannot exceed the PC3 10600 bandwidth rating of the modules.
How much heat do the 8GB sticks produce without a heat spreader during all-day operation?
With no heat spreader fitted, the bare DRAM relies on chassis airflow; registered ECC operation at 1.35V keeps thermal output modest but measurable.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



