Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black PCIe 5.0 M.2 to U.2 adapter cable with left-exit M.2 connector and 15-pin power, 1.6ft

LetLinkSo

LetLinkSo LLS-CB-1MT1UT-01 PCIe 5.0 M.2 to U.2 Adapter Left Exit 1.6ft

SKU CH-AT09-323Q3

Connects a U.2 NVMe SSD to an M.2 2280 M-key slot with PCIe 5.0 speeds up to 128 Gbps

  • ColorBlack
  • Cable Length1.6ft (50cm)
  • SpecificationsLeft Exit
  • Connector AM.2 M key 2280
  • Connector BSFF-8639(U.2)
  • Connector StyleStraight

Cable Exit Direction Left Exit

  • Connect U.2 NVMe SSD to M.2 slot via PCIe 5.0 adapter
  • Achieve up to 128 Gbps theoretical data transfer rate
  • Works with PCIe 4.0, 3.0, 2.0 and 1.0 devices
  • Ready to use with no drivers or software required
  • Requires SATA power cable connection to function

M.2 to U.2 NVMe adapter

This PCIe 5.0 adapter connects a U.2 NVMe SSD to an M.2 2280 M key slot on a motherboard. The cable measures 1.6ft and uses a left exit orientation. It supports theoretical speeds up to 128 Gbps and is backward compatible with PCIe 4.0, 3.0, 2.0 and 1.0 devices. No drivers are required.

Build integration and power

The adapter plugs straight into an available M.2 2280 M key interface and frees the U.2 drive to sit elsewhere in the chassis. A SATA power cable must be connected to the 15-pin power connector on the adapter for the drive to function. The 50cm length suits typical desktop or server layouts.

Upgrade path and limits

This adapter replaces a direct M.2 NVMe installation when a U.2 drive is preferred for capacity or endurance. The jump is worth it when the motherboard has a spare M.2 2280 M key slot and the builder can supply SATA power. It does not serve builds that lack an M.2 M key interface or that need more than four PCIe lanes.

Fordele

  • Connect U.2 NVMe SSD to M.2 slot via PCIe 5.0 adapter
  • Achieve up to 128 Gbps theoretical data transfer rate
  • Works with PCIe 4.0, 3.0, 2.0 and 1.0 devices
  • Ready to use with no drivers or software required
  • Requires SATA power cable connection to function

Specifikationer

BrandLetLinkSo
SeriesM.2 to U.2 Adapter
ModelLLS-CB-1MT1UT-01
Part NumberLLS-CB-1MT1UT-01
ColorBlack
Cable Length1.6ft (50cm)
SpecificationsLeft Exit
Connector AM.2 M key 2280
Connector BSFF-8639(U.2)
Connector StyleStraight
FeaturesENHANCED SYSTEM PERFORMANCE
Dimensions20'
Weight1.68 ounces
Package Quantity1
Package ContentsPCIe 5.0 M.2 to U.2 Adapter x 1

Andre versioner af denne model

3 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does the 128 Gbps PCIe 5.0 link saturate before the U.2 NVMe SSD reaches its rated speed?

The adapter supports PCIe 5.0 x4 at up to 128 Gbps; sustained throughput will be limited by the specific U.2 NVMe SSD you install.

How much heat or noise does the adapter add when the U.2 drive runs continuously?

The passive cable assembly has no fan or active components, so it adds no audible noise and negligible heat beyond the drive itself.

Which power cable must already be present in the system for the adapter to work?

A standard 15-pin SATA power connector from the power supply is required to power the U.2 drive through the adapter.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.