Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Desktop laser engraver with touch screen and air assist kit

LONGER

LONGER RAY5 20W Laser Engraver with Air Assist Kit

SKU CH-CFX1-3CBA5

A 20W laser engraver and cutter with a 0.08x0.1mm compressed beam, 10000mm/min speed, 3.5-inch touch screen, USB, TF card, WiFi and APP connectivity, and air assist for wood, acrylic, metal, leather.

  • TypeLaser Engraver & Cutter
  • Intricate detail from 0.08 x 0.1 mm compressed laser beam
  • Up to 10000 mm/min processing speed for rapid project completion
  • Cuts 25 mm wood and 35 mm acrylic in a single pass
  • 5 inch colour touch screen gives direct on-machine control
  • Four connection modes: USB, TF card, WiFi and APP

20W Laser Engraver with Touch Screen

The LONGER RAY5 is a 20W laser engraver and cutter built for hobbyists and small workshops that need a single machine for both marking and cutting. A 3.5 inch colour touch screen gives direct control without a host computer, while USB, TF card, WiFi and app connections cover every common workflow. Compatibility with LaserGRBL and LightBurn lets users keep their preferred software.

20W Output and Material Limits

The 20000mW diode produces a 0.08 by 0.1mm compressed beam that moves at up to 10000mm/min for fine detail work. It cuts 25mm wood and 35mm acrylic in a single pass, and slices 0.05mm stainless steel, leather, paper, glass and plastics. Thicker metals, deeper acrylic or higher-volume production runs will exceed the practical cutting depth of this power level.

Air Assist Kit and Daily Operation

An included air assist kit blows debris clear of the cut line, improving edge quality and reducing flare on wood and acrylic. Precise linear rails keep motion repeatable during long jobs, and the touch screen lets operators pause, adjust speed or restart without reaching for a keyboard. The four connection modes mean the machine fits into a bench-top, mobile or networked setup with no extra adapters.

Fordele

  • Intricate detail from 0.08 x 0.1 mm compressed laser beam
  • Up to 10000 mm/min processing speed for rapid project completion
  • Cuts 25 mm wood and 35 mm acrylic in a single pass
  • 5 inch colour touch screen gives direct on-machine control
  • Four connection modes: USB, TF card, WiFi and APP

Specifikationer

TypeLaser Engraver & Cutter

Spørgsmål om denne vare

Will the 0.08x0.1mm compressed beam work with my existing LaserGRBL projects without re-scaling?

Yes, LaserGRBL is listed as compatible software, so existing project files can be sent directly via USB, TF card, WiFi or the app.

How can I verify the 20000mW laser is firing at full power after assembly?

Run a test cut on 25mm wood or 35mm acrylic at 10000mm/min; a clean cut through the full thickness confirms the 20W output is performing as specified.

Does the box include the air-assist pump and hose, or must I source them separately?

The air-assist kit is part of the package, so the pump and hose are included; no extra purchase is required for air assist.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.