Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Small rectangular green circuit board with six servo connectors and a blue potentiometer knob

LORDWORLD

LORDWORLD 6-Channel Servo Tester with Over-Current Protection

SKU CH-0H1V-GYMYV

Six-channel servo tester with 0.09° accuracy, potentiometer control and three-channel over-current protection for robots and RC models

  • Precise servo control via 0.09° accuracy potentiometer
  • Six PWM channels let you test multiple servos simultaneously
  • Three-channel overcurrent protection prevents servo damage
  • Powered by LiPo or adapter across 5-8.4V range
  • Compact 76mm x 53mm board weighs only 37g

6-Channel Servo Tester for Robotics Builders

The LORDWORLD controller provides six PWM ports for manual servo centring and angle adjustment without writing code. A high-accuracy potentiometer delivers control resolution down to 0.09°. It suits hobbyists assembling robot arms, grippers or RC models who need immediate, hands-on verification of servo behaviour.

Thermals, Noise and Power Draw

The board draws power from a 5–8.4 V LiPo battery or adapter, consuming only the current required by the connected servos. No active cooling is fitted, so operation is completely silent. Over-current protection on three channels limits fault current to protect both the servos and the tester itself during stall conditions.

Bundled Accessories and Software Impact

No software, cables or mounting hardware are included in the package. The tester functions as a standalone hardware tool; all configuration is performed via the onboard potentiometer and reset function. Users must supply their own power source and servo leads to put the six channels into service.

Fordele

  • Precise servo control via 0.09° accuracy potentiometer
  • Six PWM channels let you test multiple servos simultaneously
  • Three-channel overcurrent protection prevents servo damage
  • Powered by LiPo or adapter across 5-8.4V range
  • Compact 76mm x 53mm board weighs only 37g

Specifikationer

BrandLORDWORLD

Spørgsmål om denne vare

How do I install the LORDWORLD 6-channel servo tester and what wiring step do people often get wrong?

Power the board from a 5-8.4V LiPo or adapter, then plug each servo into its labelled PWM port; the common mistake is reversing the signal and ground pins on the 3-pin header, which leaves the servo dead while the tester appears to work.

What maintenance or replacement will the LORDWORLD tester need over time?

The potentiometer shaft can develop wear after heavy daily use, causing jittery 0.09° steps; a drop of contact cleaner on the track every few months keeps the manual adjustment smooth.

What limit appears first when I run all six channels continuously on the LORDWORLD tester?

Only three channels have over-current protection, so sustained loads on the other three will hit the 8.4V supply rail limit first, causing voltage sag and servo brown-out.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.