Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two enclosed desktop 3D printers with blue and orange filament spools

MakerBot

MakerBot Sketch Sprint Classroom Bundle 3D Printer (2-pack)

SKU CH-T7A9-CJK48

Two enclosed FDM printers with 220mm cubic build volume, HEPA and carbon filtration, and teacher plus student certifications included

  • Type3D Printer
  • TechnologyFDM (Fused Deposition Modeling)
  • Build Size220mm x 220mm x 220mm (8.66 x 8.66 x 8.66 inches)
  • ConnectivityUSB, Wifi
  • Operation System RequirementsWindows, Mac OS X (10.12+) Chromebooks Note: Does not suppor
  • Power Requirements100-240 V, 50-60 HZ2.7-1.3A

Model Sketch Sprint

Option Two-Printer Setup

  • Two printers and four filament spools ready for immediate classroom use
  • 220 mm cubic build volume fits a wide range of student projects
  • Fully enclosed frame with HEPA and carbon filters for safer indoor printing
  • USB and Wi-Fi connectivity works with Windows, macOS 10.12+ and Chromebooks
  • 200-micron layer resolution tuned for consistent detail on PLA and Tough PLA

Classroom 3D Printer Bundle

This bundle delivers two Sketch Sprint FDM printers built for classroom use. Each unit offers a 220 x 220 x 220 mm build volume and prints at a 200 micron layer resolution. The package includes four 0.25 kg PLA spools in blue and orange, two build plates, two nozzles, two spool covers, two power cords and two tool kits. Teacher and student certification programmes are also included.

Setup Requirements

Verify that the computers in your environment run Windows, macOS 10.12 or later, or Chrome OS, because macOS Catalina is not supported. Ensure a standard 100-240 V, 50-60 Hz outlet is available for each printer. Connectivity is provided via USB or WiFi, so network access or a free USB port is needed. The printers use 1.75 mm MakerBot PLA or Tough PLA filament and a 0.4 mm nozzle.

Suitability

This bundle suits schools and educators who want a ready-to-use, dual-printer setup with safety features such as a fully enclosed build chamber, HEPA and carbon filtration, and certifications to IEC/EN/UL 60950-1 and 62368-1. It is less suited for users who need a larger build volume, higher temperature materials, or open-frame printers for modification. Buyers requiring macOS Catalina support should look elsewhere.

Fordele

  • Two printers and four filament spools ready for immediate classroom use
  • 220 mm cubic build volume fits a wide range of student projects
  • Fully enclosed frame with HEPA and carbon filters for safer indoor printing
  • USB and Wi-Fi connectivity works with Windows, macOS 10.12+ and Chromebooks
  • 200-micron layer resolution tuned for consistent detail on PLA and Tough PLA

Specifikationer

BrandMakerbot
SeriesSketch Sprint
ModelSketch Sprint Classroom Bundle
Part NumberSKETCHSPRINTCLASSROOM
Type3D Printer
TechnologyFDM (Fused Deposition Modeling)
Build Size220mm x 220mm x 220mm
(8.66 x 8.66 x 8.66 inches)
ConnectivityUSB, Wifi
Operation System RequirementsWindows, Mac OS X (10.12+)
Chromebooks
Note: Does not support Mac Catalina
Power Requirements100-240 V, 50-60 HZ2.7-1.3A
FeaturesGENERAL
Layer Resolution: 200 microns, Print mode tuned for 200 microns
Material Diameter: 1.75 mm
Material Compatibility: MakerBot PLA, MakerBot Tough PLA
Extruder Compatibility: MakerBot Sketch Extruder
Nozzle Diameter: 0.4 mm (0.015 inches)
Print File Type: .MAKERBOT
MECHANICAL
Build Surface: Flat surface
Build Plate Leveling: Heated with removable flexible build surface
SAFETY
Fully enclosed
HEPA and Carbon Filters
UL, CE, FCC
IEC/ EN/ UL60950-1, IEC/ EN/UL 62368-1
Package Contents(2) Sketch Sprint 3D Printer
(4) Spools of PLA, 0.25kg, (2 Blue, 2 Orange)
(2) Build Plates
(2) Nozzles
(2) Spool Covers
(2) US/EU Power Cords
(2) Sprint Tool Kits (Grease, Needle, Screwdriver, Snips, Hex Key Kit)
1-Year Warranty
(2) Teacher Certification
(10) Student Certification
DimensionsPrinter Size: 452mm (W) x 400mm (D) x 466mm (H) / 17.79in (W) x 15.75in (D) x 18.35in (H)
WeightPrinter Weight: 16kg (35.27b)
Forsendelsesvægt44.53 kg
Pakkestørrelse1134 × 525 × 500 mm

Andre versioner af denne model

3 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What comes in the box and what must be bought separately?

The bundle includes two Sketch Sprint printers, four 0.25 kg PLA spools (two blue, two orange), two build plates, two 0.4 mm nozzles, two spool covers, two US/EU power cords, two tool kits, plus teacher and student certifications. Additional filament or nozzles are separate purchases.

Which version or capacity should I choose for a classroom?

This is the single Classroom Bundle (SKETCHSPRINTCLASSROOM) containing two printers with a 220 x 220 x 220 mm build volume, 1.75 mm filament compatibility, and dual connectivity (USB, Wi-Fi) for Windows 10.12+, macOS (except Catalina), and Chromebooks.

What does the 200-micron layer resolution mean in practice?

The printer is tuned for 200-micron layers using 1.75 mm MakerBot PLA or Tough PLA through a 0.4 mm nozzle, giving a balance of speed and detail suitable for classroom projects within the 220 mm cubic build area.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.