Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Silver 3.5 inch SAS hard drive bare unit

Maxtor

Maxtor Atlas 15K II SAS 8K036S0 36.7GB 15000 RPM 16MB internal hard drive

SKU CH-RMC8-0487V MPN 8K036S0

A 36.7 GB SAS hard drive spinning at 15000 RPM with 16 MB cache and 3.0 ms average seek time

  • PackagingBare Drive
  • InterfaceSerial Attached SCSI (SAS)
  • Capacity36.7GB
  • RPM15000 RPM
  • Cache16MB
  • Average Seek Time3.0ms
  • 15,000 RPM spindle cuts average seek to 3.0 ms
  • 16 MB cache absorbs bursts for smoother throughput
  • Dual-port SAS design keeps data paths redundant
  • 4 million-hour MTTF rating supports 24×7 operation
  • 5-inch low-profile form fits standard drive bays

Maxtor Atlas 15K II SAS 36.7GB

The Maxtor Atlas 15K II SAS is a 3.5-inch enterprise hard drive with a 36.7GB capacity. It spins at 15000 RPM and includes a 16MB cache. The drive uses a Serial Attached SCSI interface and delivers a 3.0ms average seek time. It is built for continuous 24 x 7 operation in demanding server or workstation environments.

Suits high-IO server workloads

This drive suits administrators who need low-latency SAS storage for transaction-heavy databases or high-throughput logging. Its dual-port accessibility and 1.4000000 hour MTTF rating support high-availability configurations. Buyers who want more storage capacity per drive should look at larger models. Systems without a SAS host bus adapter or backplane cannot use this drive.

Verify SAS controller and bay fit

Before ordering, confirm your server or array has a compatible SAS controller and an available 3.5-inch drive bay. The low-profile 1.0-inch height fits standard slimline carriers. Ensure the backplane or cabling provides dual-port connectivity if multipath redundancy is required. Check that your firmware supports the Atlas 15K II SAS series for full SMART monitoring.

Fordele

  • 15,000 RPM spindle cuts average seek to 3.0 ms
  • 16 MB cache absorbs bursts for smoother throughput
  • Dual-port SAS design keeps data paths redundant
  • 4 million-hour MTTF rating supports 24×7 operation
  • 5-inch low-profile form fits standard drive bays

Specifikationer

BrandMaxtor
SeriesAtlas 15K II SAS
Model8K036S0
PackagingBare Drive
InterfaceSerial Attached SCSI (SAS)
Capacity36.7GB
RPM15000 RPM
Cache16MB
Average Seek Time3.0ms
Average Write Time3.4ms
Average Latency2ms
FeaturesUp to 39% more IO/sec than the Atlas 10K V
SCSI investment protection
Designed for 1.4000,000 hours MTTF
24 x 7 dependability
Dual port accessibility
Proven Atlas family platform
SMART features
RoHS compliant
Form Factor3.5"
Forsendelsesvægt0.68 kg
Pakkestørrelse203 × 152 × 51 mm

Spørgsmål om denne vare

What host adapter or controller does this SAS drive require to operate?

The drive uses a Serial Attached SCSI (SAS) interface and needs a compatible SAS HBA or RAID controller with a matching connector.

Can this 15000 RPM SAS drive share a backplane with older parallel SCSI drives?

No, SAS and parallel SCSI use different signalling and connectors; they cannot share the same bus or backplane segment.

How can I verify the 3.0 ms average seek time is being met after installation?

Run the vendor diagnostic utility or a synthetic I/O benchmark and compare the reported seek latency against the 3.0 ms specification.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.