Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Compact enclosed 24V 2.1A switching power supply with metal casing and terminal block

myVolts

myVolts S-50-24 24V 2.1A 50.4W Security Monitoring power supply

SKU CH-7BWE-3XJYQ MPN S-50-24

A 24V 2.1A switching power supply delivering 50.4W with 86% efficiency, selectable 85-132VAC or 170-264VAC input and ±10% voltage adjustment for industrial and security monitoring use

  • TypeAT
  • Stable 24 V output with ±1 % regulation for sensitive security gear
  • 4 W continuous power from 86 % efficient switching design
  • Wide 85–264 V AC input with selectable range suits global installations
  • Low 200 mV ripple and ±0.5 % load regulation protect connected devices
  • Compact copper-coil transformer enables safe, simple wiring in industrial cabinets

24 V 50.4 W industrial power supply

The myVolts S-50-24 delivers a regulated 24 V DC output at up to 2.1 A for 50.4 W total power. It is built for security monitoring, PLC control systems, industrial automation and similar fixed installations that need a compact, reliable source. The unit weighs little and fits tight enclosures without special mounting hardware.

AC input range and output limits

A rear switch selects between 85–132 V AC and 170–264 V AC inputs at 47–63 Hz, also accepting 240–370 V DC. Efficiency reaches 86 % while ripple and noise stay within 200 mV peak-to-peak. Line and load regulation are each held to ±0.5 %, and the output voltage can be trimmed by ±10 % from the nominal 24 V. The supply is not suited for loads that exceed 2.1 A or for equipment requiring a different DC voltage.

Wiring and common installation issues

Spring or screw terminals accept simple two-wire DC connections, and the copper-coil transformer keeps the chassis cool during continuous operation. Installers must set the input-voltage selector to match the local mains before applying power; an incorrect setting will damage the unit. The cold-start inrush reaches 45 A at 230 V AC, so the upstream breaker or fuse must tolerate that peak. Leakage current remains below 2 mA at 240 V AC, meeting typical industrial safety limits.

Fordele

  • Stable 24 V output with ±1 % regulation for sensitive security gear
  • 4 W continuous power from 86 % efficient switching design
  • Wide 85–264 V AC input with selectable range suits global installations
  • Low 200 mV ripple and ±0.5 % load regulation protect connected devices
  • Compact copper-coil transformer enables safe, simple wiring in industrial cabinets

Specifikationer

TypeAT

Spørgsmål om denne vare

How do I pick the right input voltage setting for my mains supply?

Use the selector switch to choose 85-132VAC for 115VAC regions or 170-264VAC for 230VAC regions; the unit accepts 47-63Hz and 240-370VDC.

What does the 50.4W rating mean for my 24V security gear?

It delivers up to 2.1A at 24V, so cameras or PLCs drawing 50.4W or less will run within the ±1% voltage tolerance and 200mVp-p ripple.

What limits does the AC input range place on installation?

The switch-selectable 85-132VAC or 170-264VAC range covers most global mains, with 1.1A draw at 115VAC and 0.65A at 230VAC.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.