Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Twelve green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 1.1TB 12x96GB DDR5 5600 CL46 ECC RDIMM Supermicro H13SST-G memory upgrade

SKU CH-EQKF-N7H5Y

1.1 TB kit of twelve 96 GB DDR5 registered ECC RDIMMs at 5600 MT/s CL46, validated for the Supermicro H13SST-G motherboard

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Vis 24 flere konfigurationer
  • 1 TB total capacity from twelve 96 GB modules for maximum memory density
  • DDR5-5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 2Rx4 organisation and 1.10 V operation match the Supermicro H13SST-G memory controller exactly
  • 288-pin RDIMM form factor fits the required server DIMM slots without adapters

Exact-Match Upgrade for Supermicro H13SST-G

This kit delivers 1.1TB of DDR5 memory in twelve 96GB registered ECC RDIMMs. Each module runs at 5600MHz with CL46 latency at 1.10V. The 2Rx4 organisation matches the motherboard's memory controller requirements for full-capacity recognition.

Suited for Fully Populated Servers

Ideal for administrators expanding a Supermicro H13SST-G to its maximum supported capacity with registered ECC modules. Not for systems that require unbuffered UDIMMs, SODIMM form factors, or non-ECC memory. Buyers who need a different capacity per module or a lower module count should verify their board's population rules first.

Straightforward Slot Installation

Installation follows the motherboard's documented DIMM population order; the 288-pin RDIMMs seat like standard server memory. Common issues include skipping the manual's slot sequence, mixing ranks across channels, or failing to update the BIOS before populating all twelve slots. Consult the system manual for the approved configuration steps.

Fordele

  • 1 TB total capacity from twelve 96 GB modules for maximum memory density
  • DDR5-5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 2Rx4 organisation and 1.10 V operation match the Supermicro H13SST-G memory controller exactly
  • 288-pin RDIMM form factor fits the required server DIMM slots without adapters

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will these 12 DDR5 5600 RDIMMs fit my Supermicro H13SST-G motherboard without buying any other parts?

Yes, the 288-pin Registered DIMM form factor matches the board's DDR5 slots exactly, and the kit is verified for the H13SST-G's memory population rules.

Can I keep some of my existing DDR5 4800 RDIMMs installed alongside this 96 GB CL46 kit?

Mixing speeds forces all modules to run at the slowest common rate, so the 5600 CL46 modules would drop to 4800 and you would lose the rated bandwidth.

How do I confirm the full 1.1 TB is recognised and running at DDR5 5600 CL46 after installation?

Check the BIOS memory information screen or run a tool such as dmidecode to verify all 12 modules show 96 GB each, 5600 MT/s, and CL46 timings.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.