SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00494419BTC
På lager
NEMIX RAM
NEMIX RAM 1.1TB 12x96GB DDR5 6400 CL52 ECC RDIMM Kit Supermicro H14SST-GE
A 1.1 TB kit of twelve 96 GB DDR5 6400 CL52 ECC registered RDIMMs validated for the Supermicro H14SST-GE motherboard
- Capacity1.1TB (12 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1TB total capacity from twelve 96GB modules for maximum server density
- DDR5 6400 speed with CL52 latency runs at rated performance on the Supermicro H14SST-GE
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 2Rx4 organisation and 1.10V voltage match the memory controller's exact requirements
- 288-pin RDIMM form factor fits the motherboard's memory slots without adapters
Purpose-built server kit
This 1.1TB kit delivers twelve 96GB DDR5 6400 ECC Registered RDIMMs tuned for the Supermicro H14SST-GE motherboard. It targets administrators who must populate every slot at full rated speed without manual tuning.
Registered ECC form factor
Each module uses the 288-pin RDIMM interface with 2Rx4 organisation and a 1.10V operating voltage. The registered buffer reduces electrical load on the memory controller, allowing all twelve slots to run simultaneously at CL52 while on-die ECC corrects single-bit errors in flight.
Exact capacity match
The kit supplies exactly 1.1TB in a single validated configuration, eliminating guesswork about population rules or mixed-rank instability. Builders who need a different total capacity or a UDIMM form factor must select another kit.
Fordele
- 1TB total capacity from twelve 96GB modules for maximum server density
- DDR5 6400 speed with CL52 latency runs at rated performance on the Supermicro H14SST-GE
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 2Rx4 organisation and 1.10V voltage match the memory controller's exact requirements
- 288-pin RDIMM form factor fits the motherboard's memory slots without adapters
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K12 |
| Capacity | 1.1TB (12 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.1TB 12X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Spørgsmål om denne vare
Does DDR5 6400 (PC5-51200) run at its rated speed on the Supermicro H14SST-GE, or does the platform cap it lower?
The kit is an exact-match upgrade for the Supermicro H14SST-GE. It is spec-matched to the board's memory controller so the 12 modules are recognised at full 1.1 TB capacity and operate at the rated DDR5 6400 speed with CL52 timing.
Will these 12 96 GB 288-pin RDIMMs fit the Supermicro H14SST-GE without clearance issues?
Yes. The modules use the 288-pin Registered RDIMM form factor required by the H14SST-GE. They are not UDIMM or SODIMM, and the kit is verified for the board's population rules across all 12 slots.
What is the correct installation order for the 12 RDIMMs on the Supermicro H14SST-GE, and what step is often missed?
Follow the motherboard manual for the approved DIMM population sequence. The step people miss is consulting that manual before fitting all 12 modules, because supported capacities and slot order vary by model.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 US$
0.00094585BTC
På lager