NEMIX RAM
NEMIX RAM 1.5TB (12x128GB) DDR5 4800 CL40 4Rx4 ECC RDIMM Cisco UCS X210c M7 memory upgrade
A 1.5 TB registered DDR5 kit with twelve 128 GB modules at 4800 MT/s, CL40 latency and ECC for Cisco UCS X210c M7 compute nodes
- Capacity1.5TB (12 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 5TB total capacity from twelve 128GB modules
- DDR5 4800 speed with CL40 latency for server workloads
- ECC registered design detects and corrects data errors
- 10V operation reduces power draw in dense configurations
- Validated for Cisco UCS X210c M7 compute nodes
Cisco UCS X210c M7 memory kit
This 1.5 TB kit contains twelve 128 GB DDR5 modules built for the Cisco UCS X210c M7 compute node. It delivers registered ECC memory for enterprise workloads that require data integrity and high capacity.
Registered ECC and 4Rx4 organisation
The modules operate at 4800 MT/s with CL40 latency and 1.1 V voltage. Registered buffering and 4Rx4 rank structure reduce electrical load on the memory controller, allowing all twelve DIMMs to run together without signal degradation.
288-pin RDIMM form factor
Each stick uses the standard 288-pin DDR5 RDIMM layout and has no heat spreader, so it fits the Cisco node’s memory slots directly. The kit is validated for that specific platform, eliminating guesswork during installation.
Fordele
- 5TB total capacity from twelve 128GB modules
- DDR5 4800 speed with CL40 latency for server workloads
- ECC registered design detects and corrects data errors
- 10V operation reduces power draw in dense configurations
- Validated for Cisco UCS X210c M7 compute nodes
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | Cisco Server Compatible Series Memory |
| Model | Cisco DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K12 |
| Capacity | 1.5TB (12 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Cisco |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 1.5TB (12X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Spørgsmål om denne vare
Will the 12 modules in this 1.5TB kit need any replacement or maintenance over time?
DDR5 RDIMM modules are solid-state components with no moving parts; they do not require scheduled maintenance or periodic replacement under normal server operating conditions.
What is the first limit reached when the 4Rx4 registered DIMMs run sustained workloads on the Cisco UCS X210c M7?
The 4Rx4 organisation places a higher electrical load on the memory controller, so the platform's maximum supported rank-per-channel limit is typically reached before bandwidth or capacity ceilings.
How much heat and power do the twelve 1.1V DDR5 4800 RDIMMs produce when the compute node runs all day?
Each module operates at 1.1V DDR5 standard voltage; total kit power scales with the 12-module population, and registered DIMMs add minimal overhead compared with unbuffered equivalents.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



