Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Six green DDR4 RDIMM modules with silver heat spreaders and gold contacts

NEMIX RAM

NEMIX RAM 1.5TB (6x256GB) DDR4-2933 ECC RDIMM 8Rx4 1.2V 288-Pin

SKU CH-1WNR-M6XZ7

A 1.5 TB registered DDR4 kit with six 256 GB ECC modules running at 2933 MHz and 1.2 V

  • Capacity1.5TB (6 x 256GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 5 TB total capacity from six 256 GB modules
  • DDR4-2933 speed rated at PC4-23400
  • ECC registered design detects and corrects data errors
  • 8Rx4 organisation with 1.2 V operating voltage
  • CAS latency 21 for responsive server workloads

Server Memory Kit 1.5TB Capacity

This NEMIX RAM kit provides 1.5TB of DDR4 server memory across six 256GB registered DIMMs. It is built for enterprise platforms that require ECC error correction and registered signal buffering at the DDR4 2933 standard. The modules operate at 1.2V with a CAS latency of 21. This product is not for desktop PCs or consumer motherboards lacking registered DIMM support.

Thermals Noise and Power Draw

Each module runs at the standard 1.2V DDR4 voltage, keeping power draw consistent with the DDR4 2933 specification. Registered buffering and ECC logic add minimal overhead during typical server workloads. Passive cooling via system airflow is sufficient for normal operation. No active cooling components are included or required by the kit design.

Sustained Load Behaviour

Under continuous heavy memory utilisation the 8Rx4 organisation maintains signal integrity through the registered interface. ECC corrects single-bit errors and detects multi-bit errors without halting the system. The DDR4 2933 speed rating is sustained across all six modules in supported server platforms. Stability depends on motherboard qualification and proper population rules.

Fordele

  • 5 TB total capacity from six 256 GB modules
  • DDR4-2933 speed rated at PC4-23400
  • ECC registered design detects and corrects data errors
  • 8Rx4 organisation with 1.2 V operating voltage
  • CAS latency 21 for responsive server workloads

Specifikationer

BrandNEMIX RAM
ModelPart#: MR23400-2584K6-SM-SYS-5019P-M
Part NumberPart#: MR23400-2584K6-SM-SYS-5019P-M
Capacity1.5TB (6 x 256GB)
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank8Rx4
ChipsetMajor OEM Samsung, Micron, Hynix

Spørgsmål om denne vare

How do I install the six 256GB DDR4 RDIMMs and what step is often missed?

Power down the server, open the chassis, align each 288-pin module with the DDR4 slot key, press firmly until the ejector tabs click, then confirm all six are recognised in BIOS before closing the case.

What maintenance or replacement will the ECC RDIMM kit need over time?

The modules have no moving parts; dust the slots annually with compressed air, and replace any stick that begins reporting correctable ECC errors in the system event log.

What limit appears first when the 1.5TB kit runs sustained workloads at 2933MT/s?

The 1.2V DDR4 modules will hit thermal throttling or the platform's maximum registered DIMM capacity before the 21-cycle CAS latency becomes a bottleneck.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.