NEMIX RAM
NEMIX RAM 128GB (2x64GB) DDR5 4800 CL40 ECC RDIMM for Cisco UCS X410c M7 memory upgrade
DDR5 4800 ECC registered 128 GB kit with two 64 GB RDIMMs validated for Cisco UCS X410c M7
- Capacity128GB (2 x 64GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB total capacity from two 64 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered design protects data integrity in servers
- CL40 latency at 1.10 V operating voltage
- 288-pin RDIMM form factor built for Cisco UCS X410c M7
128 GB DDR5 RDIMM Kit for Cisco UCS X410c M7
This 128 GB kit contains two 64 GB DDR5 4800 registered ECC DIMMs built for the Cisco UCS X410c M7 compute node. Each module runs at 1.10 V with CL40 latency and a 2Rx4 organisation. The registered design adds signal integrity for dense server configurations.
Suited for Cisco UCS X410c M7 memory expansion
Administrators upgrading the X410c M7 to higher capacity will match the platform's validated speed and voltage. Systems requiring unbuffered DIMMs, non-ECC modules, lower voltages or different form factors cannot use this kit.
128 GB total capacity with DDR5 4800 headroom
The dual-rank 64 GB modules fill two slots and deliver 128 GB of error-correcting memory for virtualization and database workloads. Workloads that exceed 128 GB per node or demand speeds above 4800 MT/s will need additional DIMMs or a faster memory tier.
Fordele
- 128 GB total capacity from two 64 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered design protects data integrity in servers
- CL40 latency at 1.10 V operating voltage
- 288-pin RDIMM form factor built for Cisco UCS X410c M7
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | Cisco Server Compatible Series Memory |
| Model | Cisco DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Cisco |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Spørgsmål om denne vare
Does the Cisco UCS X410c M7 compute node need a specific BIOS revision before I install this 128 GB DDR5 4800 CL40 ECC RDIMM kit?
The kit is validated for the Cisco UCS X410c M7 compute node; follow the node's firmware guide for any required BIOS version before installation.
Can I keep my existing DDR5 4800 modules and add these two 64 GB 2Rx4 registered DIMMs in the remaining slots?
Yes, provided the remaining slots accept 288-pin DDR5 RDIMMs at 1.1 V and the memory controller supports mixed-rank populations.
After seating both 64 GB modules, what should I check to confirm the 128 GB kit is running at DDR5 4800 with ECC active?
Verify in the BIOS or Cisco IMC that total capacity shows 128 GB, speed reads 4800 MT/s, and ECC status reports enabled.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



