Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Four green DDR5 RDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 128GB (4×32GB) DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM for Supermicro X14SRG-TF memory upgrade

SKU CH-HERM-NZ4PS

A 128 GB kit of four 32 GB DDR5-6400 CL52 2Rx4 ECC registered RDIMMs at 1.1 V, validated for the Supermicro X14SRG-TF motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Vis 4 flere konfigurationer
  • 128 GB total capacity from four 32 GB modules enables dense server memory configurations
  • DDR5 6400 speed with CL52 latency delivers rated throughput for Supermicro X14SRG-TF
  • Registered ECC architecture with 2Rx4 organization maintains stability across all populated slots
  • 1 V operation matches the motherboard's voltage requirement for correct initialization
  • 288-pin RDIMM form factor fits the board's memory slots without adapter or modification

Exact-match upgrade

This 128 GB kit contains four 32 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.1 V operation. It is built for the Supermicro X14SRG-TF motherboard and delivers the precise rank, voltage and timing that board's memory controller expects.

Registered ECC architecture

Registered buffering offloads the memory controller so all slots can run fully populated at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. The 288-pin RDIMM form factor matches the board's required slot type; it will not fit UDIMM or SODIMM sockets.

128 GB total capacity

Four dual-rank 2Rx4 modules provide 128 GB of registered ECC memory for multi-socket server workloads. The kit runs at DDR5-6400 (PC5-51200) with CL52 timings at 1.1 V. Builds needing more memory than four slots provide or a different DIMM type cannot use this kit.

Fordele

  • 128 GB total capacity from four 32 GB modules enables dense server memory configurations
  • DDR5 6400 speed with CL52 latency delivers rated throughput for Supermicro X14SRG-TF
  • Registered ECC architecture with 2Rx4 organization maintains stability across all populated slots
  • 1 V operation matches the motherboard's voltage requirement for correct initialization
  • 288-pin RDIMM form factor fits the board's memory slots without adapter or modification

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What sustained-throughput limit appears first when all four 32 GB modules run at DDR5-6400 continuously?

The memory controller on the Supermicro X14SRG-TF sets the practical ceiling; the kit is rated for PC5-51200 bandwidth at CL52, so the controller’s maximum supported data rate becomes the limiting factor under sustained load.

How much heat and power does the 128 GB kit produce when the server runs 24/7 at 1.1 V?

Each RDIMM operates at 1.1 V without a heat spreader; registered buffering reduces electrical load on the controller, so total power draw and thermals stay within standard DDR5 RDIMM limits for a fully populated 288-pin configuration.

Which motherboard feature must already be present for this 2Rx4 ECC RDIMM kit to function?

The Supermicro X14SRG-TF must provide 288-pin DDR5 RDIMM slots that support registered ECC memory and the specific population rules for four 32 GB 2Rx4 modules at 6400 MT/s.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.