BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00276429BTC
På lager
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR4 3200 CL22 1.2V UDIMM THINKMATE XF6-14X1 memory upgrade
A 128GB DDR4 3200 CL22 unbuffered UDIMM kit of four 32GB modules validated for the Thinkmate XF6-14X1 workstation
- Capacity128GB (4 x 32GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB capacity handles heavy workloads with four 32 GB modules
- DDR4 3200 speed delivers fast data throughput for demanding applications
- CL22 latency at 1.2 V balances responsive timing with efficient power use
- 288-pin UDIMM design fits compatible Thinkmate XF6-14X1 workstations directly
- 2Rx8 organisation on major OEM chips provides stable dual-rank performance
128GB DDR4 kit for Thinkmate XF6-14X1
This 128GB kit contains four 32GB DDR4 3200 UDIMM modules built for the Thinkmate XF6-14X1 workstation. It targets IT professionals and system builders who need a validated memory upgrade for that specific platform. The unbuffered non-ECC design matches the workstation's standard memory architecture. Installation follows the manufacturer's documented procedure.
Sustained load behaviour with CL22 timing
Modules run at 1.20V with a CAS latency of 22 and a 2Rx8 organisation using major OEM chips from Samsung, Micron or Hynix. The combination is stress tested under load to maintain stability during extended workloads. No heat spreaders are fitted, so airflow in the chassis manages thermal performance. The PC4-25600 rating reflects the rated data transfer rate.
Replaces smaller or slower DDR4 UDIMM sets
This kit replaces lower-capacity DDR4 UDIMM configurations or slower speed grades in the supported workstation. The jump is worth it when the workload demands the full 128GB capacity and the native 3200MT/s throughput. Systems already populated with matching 3200 CL22 modules will not see a latency improvement. DDR5 modules are not compatible with this platform.
Fordele
- 128 GB capacity handles heavy workloads with four 32 GB modules
- DDR4 3200 speed delivers fast data throughput for demanding applications
- CL22 latency at 1.2 V balances responsive timing with efficient power use
- 288-pin UDIMM design fits compatible Thinkmate XF6-14X1 workstations directly
- 2Rx8 organisation on major OEM chips provides stable dual-rank performance
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Spørgsmål om denne vare
Will the 1.2V operating voltage keep the system cool and quiet during continuous workloads?
The kit runs at 1.2V DDR4 standard voltage with no heat spreaders, so thermal output stays low and fan curves remain quiet during all-day use.
Does the motherboard need four free 288-pin DDR4 UDIMM slots to install the full 128GB kit?
Yes, the 4 x 32GB modules each require a 288-pin DDR4 UDIMM slot, so four unpopulated slots are necessary for the complete kit.
Can the CL22 timing be relaxed in BIOS to match slower DDR4 modules already installed?
The modules are rated CL22 at 3200 MT/s; the BIOS will negotiate the lowest common speed and latency across all populated slots.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00279001BTC
På lager
