Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Eight green DDR4 UDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR4 3200 CL22 1.2V 288-pin UDIMM memory upgrade for MSI Creator TRX40

SKU CH-2C8C-AEQAN

Eight 16 GB DDR4 3200 CL22 unbuffered UDIMMs at 1.2 V add 128 GB of non-ECC memory for the MSI Creator TRX40 motherboard

  • Capacity128GB (8 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128GB total capacity from eight 16GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • Low 1.20V operating voltage for efficient power use
  • CL22 CAS latency with 1Rx8 single-rank organisation
  • 288-pin UDIMM form factor built for MSI Creator TRX40 compatibility

Capacity and platform

This kit delivers 128GB of DDR4 memory across eight 16GB modules, validated for the MSI Creator TRX40 motherboard. It targets workstation builders and professionals who need maximum density on this specific platform.

Unbuffered UDIMM build

Each 288-pin module operates at 1.2V with CL22 latency and a 1Rx8 organisation, using major OEM chips from Samsung, Micron or Hynix. The unbuffered, non-ECC design means direct installation into standard desktop DIMM slots without registered signalling overhead.

Ready-to-install kit

The package supplies all eight matched modules in a single kit, eliminating the need to source individual sticks or verify cross-module compatibility. No additional software or heat spreaders are included, keeping the upgrade straightforward.

Fordele

  • 128GB total capacity from eight 16GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • Low 1.20V operating voltage for efficient power use
  • CL22 CAS latency with 1Rx8 single-rank organisation
  • 288-pin UDIMM form factor built for MSI Creator TRX40 compatibility

Specifikationer

BrandNEMIX RAM
SeriesMSI Gaming Motherboard Compatible Series Memory
ModelMSI DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-618K8
Capacity128GB (8 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMSI
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (8X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Spørgsmål om denne vare

Does the DDR4 3200 PC4-25600 rating limit the memory to CL22 timing on the MSI Creator TRX40?

The kit is specified at DDR4 3200 with CL22 latency and 1.20 V; the motherboard will apply these timings by default.

Will all eight 288-pin UDIMM modules physically fit the eight DIMM slots on the MSI Creator TRX40?

The kit contains eight 16 GB 288-pin UDIMM modules; the TRX40 board provides eight slots, so each module occupies one slot.

What is the correct installation sequence for the 8x16 GB kit on the MSI Creator TRX40, and which step is often missed?

Populate the eight slots in the order shown in the motherboard manual, then enable the 3200 MT/s profile in BIOS; the step often missed is activating that profile after boot.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.