Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Four green DDR3 UDIMM sticks in a row

NEMIX RAM

NEMIX RAM 16GB (4x4GB) DDR3 1333 PC3-10600 1.35V 240-Pin UDIMM Kit

SKU CH-0XDE-A3S10

A 16 GB desktop kit of four 4 GB DDR3 1333 UDIMMs running at 1.35 V for compatible systems

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 16GB (4 x 4GB)

  • 16GB quad-channel kit expands desktop capacity
  • DDR3 1333 PC3-10600 speed matches legacy motherboard specs
  • 35V low-voltage modules reduce system power draw
  • 240-pin UDIMM form factor fits standard desktop DIMM slots
  • Major OEM Samsung Micron Hynix chips ensure reliable operation

16 GB DDR3 Kit for Desktop Upgrades

This kit delivers sixteen gigabytes across four unbuffered UDIMM modules. Each stick runs at 1333 MT/s with CL9 latency at 1.50 V. The 240-pin form factor fits standard desktop boards that accept DDR3 memory.

Low-voltage operation keeps thermals modest

Rated at 1.35 V nominal, the modules draw less power than standard 1.50 V parts under typical workloads. No heat spreaders are fitted, so airflow across the PCB handles cooling silently. Power consumption stays low during everyday desktop tasks.

CL9 timing at 1333 MT/s defines responsiveness

The CAS latency of nine cycles at the rated speed determines how quickly the memory can serve data to the CPU. This single figure lets you confirm whether the kit matches your motherboard’s supported timing table.

Fordele

  • 16GB quad-channel kit expands desktop capacity
  • DDR3 1333 PC3-10600 speed matches legacy motherboard specs
  • 35V low-voltage modules reduce system power draw
  • 240-pin UDIMM form factor fits standard desktop DIMM slots
  • Major OEM Samsung Micron Hynix chips ensure reliable operation

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-428LK4
Capacity16GB (4 x 4GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How do I install the 240-pin DDR3 UDIMM modules and what step is often missed?

Align the notch on each module with the slot key, press straight down until both side clips click, then verify in BIOS that all 16GB are detected at 1333 MHz.

What maintenance or replacement will this 1.50V DDR3 kit need over time?

No scheduled maintenance is required; if a module fails the lifetime replacement warranty covers it, otherwise the kit runs until a platform upgrade forces DDR3 retirement.

What limit appears first when the four 4GB sticks run sustained workloads at 1333 MHz?

The 16GB total capacity ceiling is reached before bandwidth or thermal limits become an issue with these unbuffered non-ECC modules.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.