Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board SODIMM module with black memory chips, no heat spreader, 260 gold pins visible

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 2Rx8 1.2V 260-pin SODIMM memory upgrade

SKU CH-ZVEJ-CBQHQ

16 GB DDR4 2666 SODIMM module rated CL19 at 1.2 V, built for Supermicro systems

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 2666 MHz SODIMM boosts system responsiveness
  • CL19 latency and 1.2 V operation keep power draw low
  • 2Rx8 dual-rank layout maximises memory bandwidth
  • 260-pin form factor fits Supermicro DDR4 SODIMM slots
  • Built with Samsung Micron Hynix chips for proven reliability

SuperMicro Compatible DDR4 SODIMM

This 16GB NEMIX RAM module is built for SuperMicro servers and workstations that require DDR4 2666 memory. It arrives as a single 260-pin SODIMM rated at 1.20V with a CAS latency of CL19. The unbuffered, non-ECC design matches the SuperMicro MEM-DR416L-SL01-SO26 specification.

Who should buy this

IT teams maintaining compatible SuperMicro platforms can install this stick to add 16GB of capacity in minutes. Buyers who need ECC error correction, registered buffering, a different voltage, or a DIMM form factor should look at something else.

Deciding specification

The 260-pin DDR4 SODIMM interface is the single detail that determines whether this module fits the slot. Only systems designed for 260-pin DDR4 SODIMMs at 1.2V can accept this part.

Fordele

  • 16 GB DDR4 2666 MHz SODIMM boosts system responsiveness
  • CL19 latency and 1.2 V operation keep power draw low
  • 2Rx8 dual-rank layout maximises memory bandwidth
  • 260-pin form factor fits Supermicro DDR4 SODIMM slots
  • Built with Samsung Micron Hynix chips for proven reliability

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-628K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Spørgsmål om denne vare

Should I choose the 1X16GB kit or add a second module for dual-channel?

The module is sold as a single 16GB stick. Adding a second identical module enables dual-channel operation on platforms that support it.

Will the 2666MHz speed run at that rate in my Supermicro system?

The module is rated for DDR4 2666 (PC4-21300). It will operate at that speed if the platform's memory controller supports it; otherwise it downclocks to the highest supported speed.

Does the 260-pin SODIMM interface limit capacity or speed?

The 260-pin DDR4 SODIMM form factor supports this 16GB 2Rx8 module at 2666MHz. The interface itself does not impose a lower cap on this configuration.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.