Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 CL21 1.2V 2Rx8 288-Pin UDIMM memory upgrade

SKU CH-B063-S3GBA

16 GB DDR4 desktop memory running at 2933 MHz with CL21 latency and 1.2 V operation

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 2933 boosts desktop speed
  • CL21 timing keeps data flow steady
  • 2V operation lowers power draw
  • 2Rx8 rank layout fits standard slots
  • 288-pin UDIMM ensures broad compatibility

Samsung-compatible DDR4 upgrade

This 16 GB DDR4 module is built for Samsung desktop systems that require PC4-23400 speed at 1.20 V. It targets owners of compatible Samsung PCs who want a straightforward capacity increase without changing voltage or timing settings.

Unbuffered UDIMM with major OEM chips

The stick uses 2Rx8 organisation on a standard 288-pin UDIMM form factor and carries no heat spreader. Major-brand Samsung, Micron or Hynix ICs are used, and every unit is stress-tested under load before it leaves the factory.

DDR4 2933 CL21 practical limits

The JEDEC-standard DDR4 2933 interface caps bandwidth at the PC4-23400 rating, so throughput cannot exceed that ceiling. Systems needing ECC protection or registered signalling will not accept this non-ECC unbuffered module.

Fordele

  • 16GB DDR4 2933 boosts desktop speed
  • CL21 timing keeps data flow steady
  • 2V operation lowers power draw
  • 2Rx8 rank layout fits standard slots
  • 288-pin UDIMM ensures broad compatibility

Specifikationer

BrandNEMIX RAM
SeriesSamsung Desktop PC Compatible Series Memory
ModelSamsung DDR4 288-Pin Non-ECC Unbuffered UDIMM
Part NumberMD23400-628K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSamsung
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM

Spørgsmål om denne vare

What bandwidth does the DDR4 2933 interface cap at in practice?

The DDR4 2933 (PC4-23400) interface provides a peak transfer rate of 23400 MB/s, which is the practical ceiling for this module.

What physical slot and clearance does the 288-pin UDIMM require?

It fits a standard desktop 288-pin DDR4 UDIMM slot and has no heat spreader, so it clears most CPU coolers without extra height.

How is the module installed, and what step do people often miss?

Align the notch with the slot key, press down firmly until both side clips click shut, then verify in BIOS that the system reports 16 GB at 2933 MT/s with CL21 timings.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.