NEMIX RAM
NEMIX RAM 16GB DDR4 3200 ECC RDIMM 2Rx8 CL22 1.2V 288-Pin Micron MTA18ASF2G72PDZ-3G2 Memory Upgrade
16 GB DDR4-3200 ECC registered DIMM for Micron-compatible servers, CL22 at 1.2 V
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 3200 boosts server throughput
- ECC registered design protects data integrity
- 2Rx8 dual-rank layout increases memory density
- 2V operation reduces power draw
- 288-pin RDIMM fits standard server slots
Server-grade ECC RDIMM
This 16 GB DDR4 module delivers registered ECC operation at 3200 MT/s for Micron-compatible servers and workstations. The 2Rx8 organisation and CL22 latency support data-integrity workloads where error correction is mandatory.
Registered 288-pin form factor
The RDIMM register buffers address and command signals, reducing electrical load on the memory controller in multi-module configurations. A standard 1.20 V supply and 288-pin edge connector allow direct installation in compatible DDR4 server DIMM slots without extra cabling.
DDR4 platform limits
DDR4 tops out at 3200 MT/s JEDEC speeds, so this module reaches the interface ceiling. Builders needing higher bandwidth or greater density per slot must move to a DDR5 platform, which requires a new motherboard and CPU.
Fordele
- 16GB DDR4 3200 boosts server throughput
- ECC registered design protects data integrity
- 2Rx8 dual-rank layout increases memory density
- 2V operation reduces power draw
- 288-pin RDIMM fits standard server slots
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | Micron Server/Workstaion Compatible Series Memory |
| Model | Micron DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | MICRON |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Spørgsmål om denne vare
Does the DDR4 3200 PC4-25600 rating determine the module's peak data rate?
The module is specified at DDR4 3200 with a PC4-25600 designation, which indicates its rated transfer speed.
What physical slot and keying does the 288-pin RDIMM require?
It fits a standard DDR4 288-pin RDIMM socket; the registered design and 2Rx8 organisation mean the motherboard must support registered ECC memory.
What is the correct installation sequence for this registered ECC module?
Power down the system, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until the retention clips lock, then verify the module is recognised in BIOS.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



