NEMIX RAM
NEMIX RAM 16GB DDR5 4800 ECC RDIMM 1Rx8 CL40 1.1V Dell PowerEdge R660
16GB DDR5 4800 ECC RDIMM CL40 1.1V registered module for Dell PowerEdge R660 servers
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- ECC protection safeguards data integrity in critical workloads
- Registered design stabilises signal for reliable server operation
- 4800 MT/s DDR5 speed meets PowerEdge R660 specifications
- 1 V operation reduces power draw per module
- 1Rx8 single-rank layout optimises memory-channel efficiency
Dell PowerEdge R660 DDR5 server memory
This NEMIX RAM module provides 16 GB of DDR5 4800 registered ECC memory for the Dell PowerEdge R660 rack server. It uses a single 1Rx8 rank at CL40 latency and 1.10 V. The 288-pin RDIMM form factor fits the platform's DDR5 slots directly.
Thermals noise and power draw in normal use
The module operates at the standard DDR5 voltage of 1.10 V without a heat spreader. Registered buffering and ECC add minimal overhead to the memory controller. Power draw scales with the 4800 MT/s data rate under typical server workloads.
Build quality connectors and daily implications
Major OEM chips from Samsung, Micron or Hynix are stress tested under load for stability. The 288-pin RDIMM edge connector ensures secure seating in the R660 memory slots. No heat spreader means clearance is not a concern in dense configurations. This module does not suit systems requiring unbuffered UDIMMs or non-ECC memory.
Fordele
- ECC protection safeguards data integrity in critical workloads
- Registered design stabilises signal for reliable server operation
- 4800 MT/s DDR5 speed meets PowerEdge R660 specifications
- 1 V operation reduces power draw per module
- 1Rx8 single-rank layout optimises memory-channel efficiency
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Series Server Memory |
| Model | Dell Compatible DDR5 ECC Registered RDIMM |
| Part Number | MR38400-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Motherboard Compatible |
Spørgsmål om denne vare
How do I install the 288-pin DDR5 RDIMM in the PowerEdge R660, and what step is often missed?
Align the notch on the module with the slot key, press down firmly until both ejector clips snap shut, then verify in the BIOS that the 16GB module is detected at 4800 speed.
What maintenance or replacement will this ECC registered module need over time?
No routine maintenance is required; the module carries a lifetime replacement warranty, so it is only replaced if a memory diagnostic reports an uncorrectable error.
What limit appears first when the RDIMM runs sustained workloads at 1.10 V?
The CL40 latency at 4800 MT/s is the primary timing constraint; thermal throttling is unlikely without a heat spreader under normal server airflow.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



