Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 1.1V 288-pin UDIMM for ASRock IMB-1317/X1317 memory upgrade

SKU CH-6NC0-1EDC8

16 GB DDR5 5600 CL46 UDIMM for ASRock IMB-1317 and IMB-X1317 motherboards

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 5600 MHz adds responsive capacity for multitasking
  • CL46 latency keeps data flowing smoothly under load
  • 1 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits ASRock IMB-1317 and IMB-X1317 boards
  • Single-rank 1Rx8 layout simplifies memory controller timing

16GB DDR5 5600 UDIMM for ASRock Industrial

This 16GB DDR5 module runs at 5600MHz with CL46 latency and 1.1V operation. It is built as a single-rank 1Rx8 UDIMM using major OEM chips from Samsung, Micron or Hynix. The part is validated for ASRock Industrial Micro-ATX motherboards IMB-1317 and IMB-X1317.

Who this suits and who should look elsewhere

Builders upgrading the named ASRock Industrial boards with a single 16GB DDR5 stick will find this module a direct fit. Buyers who need ECC error correction, registered buffering, a heat spreader, or capacities other than 16GB cannot use this part.

The specification that decides fit

The 288-pin DDR5 UDIMM form factor combined with non-ECC unbuffered operation and CL46 timing at 5600MHz determines whether the motherboard will accept and run this memory correctly.

Fordele

  • 16 GB DDR5 5600 MHz adds responsive capacity for multitasking
  • CL46 latency keeps data flowing smoothly under load
  • 1 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits ASRock IMB-1317 and IMB-X1317 boards
  • Single-rank 1Rx8 layout simplifies memory controller timing

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock Industrial
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM

Spørgsmål om denne vare

Does the ASRock IMB-1317 motherboard need a DDR5 5600 capable BIOS before this 1.10V UDIMM will post?

The IMB-1317 and IMB-X1317 are DDR5 platforms, so they require a BIOS that supports DDR5 5600 operation; the module runs at 1.10V with CL46 timings once the board is configured for that speed.

Can I keep my existing DDR5 memory installed alongside this 1Rx8 288-pin module on the IMB-1317?

The board has two UDIMM slots; this single-rank 1Rx8 stick can share the channel with another DDR5 UDIMM provided both run at 5600 MT/s and 1.1V, but mixing ranks or speeds may force the slower timing.

How do I confirm the module is running at PC5-44800 after installation?

Check the BIOS memory information screen or a tool like CPU-Z; it should report DDR5 5600 MT/s, CL46, 1.1V and a single 16GB 1Rx8 rank for the MD44800-618K1 part.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.