Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green bare DDR5 memory module with gold contacts and black chips

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 1.1V UDIMM ASRock IMB-A1302 IMB-A1700 memory upgrade

SKU CH-A00H-1KAEW

16 GB DDR5 5600 CL46 1.1 V UDIMM for ASRock IMB-A1302 and IMB-A1700 industrial boards

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 5600 memory expands system capacity
  • CL46 latency supports responsive data access
  • 1 V operation reduces power draw
  • 288-pin UDIMM fits ASRock IMB-A1302 and IMB-A1700 boards
  • Single-rank 1Rx8 layout simplifies memory configuration

Compatible DDR5 upgrade for ASRock industrial boards

This 16 GB DDR5 UDIMM is validated for the ASRock IMB-A1302 and IMB-A1700 micro-ATX motherboards. It targets system integrators and IT teams who need a straightforward capacity increase on those specific platforms. The module is sold new and carries a CL46 latency rating at the standard 5600 MT/s data rate.

Single 288-pin DIMM for simple slot population

The kit provides one 16 GB rank in a 1Rx8 organisation, leaving additional slots free for further expansion if the board supports it. No heat spreader is fitted, so the module fits tight industrial chassis without clearance concerns. Installation follows the usual UDIMM procedure and requires no extra cables or configuration beyond seating the module firmly.

Low-voltage DDR5 operation at 1.1 V

Running at the JEDEC-standard 1.10 V, the memory draws minimal power and generates little heat during typical workloads. With no onboard lighting or active cooling, acoustic output is limited to the system’s own airflow. The unbuffered, non-ECC design keeps the electrical load light for the memory controller in normal desktop and embedded use.

Fordele

  • 16 GB DDR5 5600 memory expands system capacity
  • CL46 latency supports responsive data access
  • 1 V operation reduces power draw
  • 288-pin UDIMM fits ASRock IMB-A1302 and IMB-A1700 boards
  • Single-rank 1Rx8 layout simplifies memory configuration

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock Industrial
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM

Spørgsmål om denne vare

Will the 1.1V DDR5 5600 module throttle under sustained heavy workloads?

Standard DDR5 UDIMMs run at 1.1V without thermal throttling in typical desktop workloads because the JEDEC voltage is already the lowest defined for DDR5.

How much heat and noise does this UDIMM add when the system runs all day?

The module has no heat spreader and draws only 1.1V, so it adds negligible heat and zero audible noise; system airflow handles the small thermal load.

Which motherboard must already be installed for this memory to work?

An ASRock Industrial Micro-ATX motherboard model IMB-A1302 or IMB-A1700 with a DDR5 UDIMM slot is required.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.