NEMIX RAM
NEMIX RAM 16GB DDR5 6400 CL52 1Rx8 ECC RDIMM Supermicro H13SST-GC memory upgrade
16 GB DDR5 6400 CL52 ECC registered RDIMM validated for the Supermicro H13SST-GC motherboard
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match 16 GB DDR5-6400 CL52 1Rx8 ECC RDIMM for Supermicro H13SST-GC
- Registered ECC architecture corrects single-bit errors and offloads the memory controller
- 1 V DDR5 at 6400 MT/s delivers rated speed with standard voltage
- 288-pin RDIMM form factor fits the board's required slot type
- Lifetime replacement warranty with US-based technical support included
16 GB DDR5 RDIMM for Supermicro H13SST-GC
This 16 GB DDR5-6400 Registered ECC module is built to the exact rank, voltage and timing the Supermicro H13SST-GC memory controller expects. It installs as a 288-pin RDIMM so the board recognises full capacity and runs at its rated speed without manual tuning.
Capacity and headroom at 6400 MT/s
A single 1Rx8 rank delivers 16 GB of registered memory with on-die ECC that corrects single-bit errors before they reach the operating system. The registered buffer lets every populated slot run at full load, while the 1.1 V operating point keeps power draw predictable for dense server configurations.
DDR5 RDIMM interface limits
The 288-pin RDIMM form factor is required by this motherboard; UDIMM or SODIMM modules will not fit or function. Population rules and maximum supported capacity are defined by the system manual, so verified fitment must be confirmed before installation.
Fordele
- Exact-match 16 GB DDR5-6400 CL52 1Rx8 ECC RDIMM for Supermicro H13SST-GC
- Registered ECC architecture corrects single-bit errors and offloads the memory controller
- 1 V DDR5 at 6400 MT/s delivers rated speed with standard voltage
- 288-pin RDIMM form factor fits the board's required slot type
- Lifetime replacement warranty with US-based technical support included
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Spørgsmål om denne vare
Will this 16GB DDR5 6400 RDIMM run alongside my existing DDR5 modules in the Supermicro H13SST-GC?
Mixing speeds forces all slots to run at the slowest module's rate; consult the motherboard manual for supported population rules and approved DIMM configurations before installing.
How can I confirm the RDIMM is operating at 6400 CL52 with ECC active after installation?
Enter the BIOS or UEFI and verify the memory frequency reads 6400 MT/s, CAS latency shows CL52, and ECC status reports as enabled for the installed 16GB module.
What comes in the package and are any extra components required for the Supermicro H13SST-GC?
The box contains one 16GB DDR5 6400 1Rx8 ECC Registered RDIMM; no additional parts are needed if a compatible DIMM slot is free on the H13SST-GC motherboard.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



