NEMIX RAM
NEMIX RAM 1TB (8x128GB) DDR5 4800 CL40 1.1V 4Rx4 ECC RDIMM Cisco UCS C240 M7
Eight-module kit delivers 1 TB of registered ECC DDR5 at 4800 MT/s with CL40 latency for Cisco UCS C240 M7 servers
- Capacity1TB (8 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 1 TB total capacity with eight 128 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM for data integrity in servers
- 1 V operation reduces power draw per module
- Validated for Cisco UCS C240 M7 rack servers
Cisco UCS C240 M7 compatible kit
This 1 TB kit contains eight 128 GB DDR5 RDIMM modules built for the Cisco UCS C240 M7 rack server. Each module runs at 4800 MT/s with CL40 latency at 1.1 V and uses a 4Rx4 organisation with on-die ECC. The registered design adds a buffer that helps the memory controller manage heavy loads in multi-socket configurations.
Suited for Cisco UCS C240 M7 upgrades
Administrators expanding memory in a Cisco UCS C240 M7 will find the kit validated for that platform. Systems that require unbuffered DIMMs, a different pin count, or a lower density per module cannot use this memory. Buyers needing non-ECC consumer memory or a different server model should look elsewhere.
Eight matched modules in one package
The kit ships as a matched set of eight 128 GB sticks, removing the need to source individual modules and reducing the risk of mixing revision codes. No heat spreaders are included, so airflow in dense chassis must be managed by the server’s own cooling. No additional software or firmware is bundled.
Fordele
- 1 TB total capacity with eight 128 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM for data integrity in servers
- 1 V operation reduces power draw per module
- Validated for Cisco UCS C240 M7 rack servers
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | Cisco Server Compatible Series Memory |
| Model | Cisco DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K8 |
| Capacity | 1TB (8 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Cisco |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 1TB (8X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Spørgsmål om denne vare
Does the Cisco UCS C240 M7 server need to support DDR5 4800 RDIMMs and have eight free 288-pin slots to use this 1 TB kit?
Yes, the kit contains eight 128 GB DDR5 4800 CL40 1.1 V 4Rx4 ECC registered DIMMs on 288-pin RDIMM form factor, so the host must accept DDR5 RDIMMs at that speed and provide eight available memory slots.
Can these 4Rx4 modules be mixed with lower-rank DDR5 RDIMMs already installed in the Cisco UCS C240 M7?
Mixing different rank configurations is not recommended; the server memory controller expects consistent rank-per-channel topology, so populate all channels with matching 4Rx4 modules for stable operation.
After installation, how can I verify the kit is running at DDR5 4800 CL40 with ECC active?
Check the BIOS memory information or Cisco UCS Manager inventory; it should show 1 TB total capacity, 4800 MT/s data rate, CL40 latency, 1.10 V voltage and ECC enabled on every module.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



