SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00495794BTC
På lager
NEMIX RAM
NEMIX RAM 256GB (2x128GB) DDR5 4800 CL40 4Rx4 ECC RDIMM SuperMicro SSG-521E X13SEDW memory upgrade
256 GB (2 × 128 GB) DDR5 4800 CL40 4Rx4 ECC registered RDIMM kit validated for SuperMicro SSG-521E and X13SEDW servers
- Capacity256GB (2 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB capacity scales memory-heavy workloads on SuperMicro SSG-521E X13SEDW
- DDR5 4800 speed with CL40 latency supports high-throughput server tasks
- ECC registered design detects and corrects single-bit errors for data integrity
- 1 V operation lowers power draw across 2 x 128 GB modules
- 288-pin 4Rx4 RDIMM form factor fits validated SuperMicro server slots
System-Specific 256 GB DDR5 Kit
This NEMIX RAM kit delivers 256 GB of DDR5 memory in two 128 GB modules built for SuperMicro platforms. It runs at 4800 MHz with CL40 latency and operates at 1.1 V. The modules are ECC registered RDIMMs using a 4Rx4 organisation and 288-pin connectors.
Suited for SuperMicro SSG-521E and X13SEDW servers
This memory targets administrators upgrading compatible SuperMicro Storage SuperServer systems. It is not suitable for workstations or desktops that require unbuffered UDIMMs, nor for platforms that cannot accept registered ECC RDIMMs or the 4Rx4 rank configuration.
4Rx4 registered ECC RDIMM form factor
The decisive specification is the 4Rx4 registered ECC RDIMM layout on a 288-pin DDR5 module. Only systems qualified for this exact rank and buffer type will post and run stably with this kit.
Fordele
- 256 GB capacity scales memory-heavy workloads on SuperMicro SSG-521E X13SEDW
- DDR5 4800 speed with CL40 latency supports high-throughput server tasks
- ECC registered design detects and corrects single-bit errors for data integrity
- 1 V operation lowers power draw across 2 x 128 GB modules
- 288-pin 4Rx4 RDIMM form factor fits validated SuperMicro server slots
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K2 |
| Capacity | 256GB (2 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (2X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Spørgsmål om denne vare
Does the SuperMicro SSG-521E X13SEDW need a specific BIOS revision before these 4Rx4 DDR5 4800 ECC RDIMMs will post?
The modules are DDR5 4800 PC5-38400 CL40 1.10 V 4Rx4 ECC registered 288-pin RDIMMs built with major OEM Samsung Micron Hynix chips and validated for the SSG-521E-E1CR24H SSG-521E-E1CR24L X13SEDW platform.
If I keep existing DDR5 4800 ECC RDIMMs in the remaining slots, will this 256 GB 2x128 GB kit run at its rated 4800 MT/s CL40?
Matching speed voltage rank and registered ECC type across all populated channels lets the memory controller train at DDR5 4800; mixing different ranks or latencies can force the system to the lowest common denominator.
How can I verify the kit is operating at DDR5 4800 CL40 1.10 V with ECC active after installation?
Enter the system BIOS or UEFI and confirm the memory frequency reads 4800 MT/s, CAS latency shows CL40, voltage reports 1.10 V, and ECC status is enabled for each 128 GB module.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 US$
0.00094848BTC
På lager