Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR4 SODIMM modules, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2400 CL17 2Rx8 1.2V 260-pin SODIMM kit for POSIFLEX RT-6116

SKU CH-SRN2-ZBTC3

A 32 GB DDR4 2400 SODIMM kit, two 16 GB modules at CL17 and 1.20 V, built for the POSIFLEX RT-6116 terminal

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB dual-channel kit expands POS terminal multitasking headroom
  • DDR4 2400 MT/s PC4-19200 speed matches system memory bus
  • CL17 CAS latency at 1.20 V keeps power draw low
  • 260-pin SODIMM form factor fits POSIFLEX RT-6116 slots directly
  • Samsung, Micron or Hynix DRAM chips tested under load for stability

POSIFLEX RT-6116 memory kit

This 32 GB kit contains two 16 GB DDR4 2400 SODIMM modules built for the POSIFLEX RT-6116 terminal. It targets retailers and system integrators who need to maximise the memory capacity of that specific point-of-sale platform. The non-ECC unbuffered design matches the terminal's memory controller requirements.

260-pin DDR4 SODIMM form factor

Each module uses the 260-pin DDR4 SODIMM form factor and operates at 1.2 V with CL17 latency. The kit plugs directly into the terminal's two SODIMM slots, freeing the installer from sourcing individual sticks or verifying cross-compatibility. No heat spreader is fitted, keeping the profile slim for the compact chassis.

Lifetime replacement warranty included

The package delivers the matched 2 x 16 GB kit ready for installation. NEMIX RAM backs the modules with a lifetime replacement warranty and US-based technical support, so the terminal can return to service quickly if a module ever fails. No additional software or accessories are bundled.

Fordele

  • 32 GB dual-channel kit expands POS terminal multitasking headroom
  • DDR4 2400 MT/s PC4-19200 speed matches system memory bus
  • CL17 CAS latency at 1.20 V keeps power draw low
  • 260-pin SODIMM form factor fits POSIFLEX RT-6116 slots directly
  • Samsung, Micron or Hynix DRAM chips tested under load for stability

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

Spørgsmål om denne vare

How much power does the DDR4 2400 kit draw at 1.2 V under sustained load?

The modules operate at 1.20 V, the standard DDR4 voltage, keeping power draw low during continuous operation.

Does the CL17 2Rx8 SODIMM generate noticeable heat without a spreader during all-day use?

No heat spreader is fitted; the unbuffered DDR4 design runs at standard voltage and typically stays cool in the POSIFLEX RT-6116 chassis airflow.

Will the 260-pin kit work in my POSIFLEX RT-6116 without any other hardware changes?

Yes, the 32 GB (2 x 16 GB) kit is built specifically for the POSIFLEX RT-6116 and installs directly into its SODIMM slots.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.