Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green 288-pin DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V UDIMM QNAP TS-H1677AXU-RP memory upgrade

SKU CH-282K-N9H3J

A 32 GB DDR5 kit with two 16 GB unbuffered UDIMMs at 4800 MT/s CL40, 1.1 V, validated for the QNAP TS-H1677AXU-RP NAS

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB 2X16GB

  • 32 GB kit expands QNAP TS-H1677AXU-RP capacity
  • DDR5 4800 MT/s raises memory bandwidth for NAS workloads
  • CL40 1.10 V timing keeps power draw low
  • 288-pin UDIMM fits QNAP DDR5 slots directly
  • Two 16 GB modules enable dual-channel operation

Compatible QNAP NAS Upgrade

This 32 GB kit uses two 16 GB DDR5 4800 modules built for the QNAP TS-H1677AXU-RP. The 1.10 V unbuffered UDIMMs install without ECC or registration requirements. IT teams select this memory to expand capacity for virtualisation and heavy file workloads.

Straightforward DIMM Installation

The 288-pin DDR5 sticks seat in standard UDIMM slots and need no extra configuration beyond the system firmware. CL40 timing is applied automatically at 4800 MT/s. Mistakes happen when slots are populated in the wrong order or when mixed with existing modules of different rank or voltage.

Steady Throughput Under Load

Rigorous stress testing confirms stable operation during sustained multi-threaded tasks such as backup deduplication and container hosting. The 1Rx8 organisation and major OEM chips maintain consistent bandwidth without throttling. Workloads needing ECC protection or higher frequencies are not addressed by this kit.

Fordele

  • 32 GB kit expands QNAP TS-H1677AXU-RP capacity
  • DDR5 4800 MT/s raises memory bandwidth for NAS workloads
  • CL40 1.10 V timing keeps power draw low
  • 288-pin UDIMM fits QNAP DDR5 slots directly
  • Two 16 GB modules enable dual-channel operation

Specifikationer

BrandNEMIX RAM
SeriesQNAP NAS Compatible Series Memory
ModelQNAP DDR5 4800MHZ Non-ECC Unbuffered UDIMM NAS Memory
Part NumberMD38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemQnap
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How can I confirm the NEMIX RAM kit is running at DDR5 4800 CL40 after installing it in my QNAP TS-H1677AXU-RP?

Enter the NAS BIOS or use the QNAP system information panel to verify the memory speed reads 4800 MT/s and the CAS latency shows CL40 at 1.10 V.

What exactly ships in the package and is anything else required to complete the upgrade?

The box contains two 16 GB 288-pin DDR5 UDIMM modules for a total of 32 GB; no additional parts or cables are needed for installation.

Should I choose this 32 GB kit or a different capacity for the TS-H1677AXU-RP?

This 32 GB kit (2×16 GB) matches the validated DDR5 4800 CL40 specification for the TS-H1677AXU-RP; select it when 32 GB is the desired total capacity.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.