Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR5 UDIMM sticks, no heat spreader, 288-pin, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V 288-Pin UDIMM Supermicro BH4SRG

SKU CH-HH51-AE126

A 32 GB DDR5 kit of two 16 GB UDIMMs running at 5600 MHz CL46 and 1.1 V, built for the Supermicro BH4SRG motherboard

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB kit in two 16 GB modules for high capacity
  • DDR5 5600 speed rated at PC5-44800 for fast data rates
  • Low 1.10 V operation reduces power draw
  • CL46 CAS latency supports responsive timing
  • Validated for Supermicro BH4SRG motherboard compatibility

System Specific Memory Kit

This NEMIX RAM kit provides 32GB of DDR5 memory in a matched pair of 16GB modules. It is built for desktop systems that use 288-pin UDIMM slots and supports a base speed of 5600MHz with CL46 latency. The unbuffered non-ECC design suits standard consumer and workstation platforms rather than registered server channels.

Compatibility Check

Verify that your motherboard accepts DDR5 UDIMM modules and specifically lists support for the Supermicro BH4SRG platform. Confirm the board has two available 288-pin slots and can operate memory at 1.1V without requiring a higher voltage profile. Consult the motherboard manual for population rules and any BIOS updates needed for 5600MHz operation.

Sustained Load Behaviour

The modules run at a low 1.1V, which helps limit heat output during extended workloads. Without a heat spreader, airflow across the PCB becomes the primary cooling path inside the case. The 1Rx8 organisation allows consistent bandwidth delivery for long rendering or compilation sessions where memory throughput stays saturated.

Fordele

  • 32 GB kit in two 16 GB modules for high capacity
  • DDR5 5600 speed rated at PC5-44800 for fast data rates
  • Low 1.10 V operation reduces power draw
  • CL46 CAS latency supports responsive timing
  • Validated for Supermicro BH4SRG motherboard compatibility

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Spørgsmål om denne vare

Does the NEMIX RAM 32GB kit include only the two 16GB DDR5 UDIMM modules or are any extra accessories supplied?

The package contains only the two 16GB DDR5 5600 CL46 1.1V 288-pin UDIMM modules; no heat spreader, cables or tools are included.

Why choose the 32GB 5600 CL46 kit instead of a higher-speed or lower-latency DDR5 option for the Supermicro BH4SRG?

This kit matches the motherboard's validated 5600 MT/s specification and 1.1V operation, ensuring stable plug-in compatibility without manual tuning.

What does the 5600 MT/s rating actually deliver once the modules are installed in the Supermicro BH4SRG?

The system will run the memory at 5600 MT/s with CL46 timings at the standard 1.1V, providing the rated PC5-44800 bandwidth out of the box.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.