Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green circuit boards with black chips and gold edge connectors lying side by side

NEMIX RAM

NEMIX RAM 32GB 2x16GB DDR5 5600 CL46 1Rx8 ECC RDIMM GIGABYTE MZ33-CP1 memory upgrade

SKU CH-F429-EY43F

A 32 GB DDR5 kit of two 16 GB ECC registered DIMMs running at 5600 MT/s with CL46 latency, validated for the Gigabyte MZ33-CP1 server motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Vis 24 flere konfigurationer
  • 32 GB kit lets the MZ33-CP1 run at full 5600 MT/s rated speed
  • Registered ECC design corrects single-bit errors on the fly for data integrity
  • 1Rx8 organisation matches the board's memory controller for reliable full-capacity operation
  • 288-pin RDIMM form factor fits the server motherboard's DDR5 slots exactly
  • 1 V DDR5 modules draw minimal power while delivering PC5-44800 bandwidth

Exact-match DDR5-5600 ECC RDIMM kit

This 32 GB kit contains two 16 GB DDR5 registered DIMMs rated at 5600 MT/s with CL46 latency and 1.10 V operation. The modules use a 1Rx8 organisation and on-die ECC with registered buffering to meet the GIGABYTE MZ33-CP1 motherboard's exact memory-controller requirements.

Registered DDR5 limits population flexibility

The registered RDIMM interface offloads the memory controller, allowing full-capacity operation when every slot is populated, but the motherboard's qualified-vendor list and population-order rules still dictate which slots may be filled and in what sequence. Exceeding the board's approved rank-per-channel limit or mixing ranks will prevent the system from posting at the rated 5600 MT/s speed.

Install by the manual to avoid no-post

The 288-pin RDIMMs key only one way into the DDR5 slots; force is never required. Most installation failures come from ignoring the board's mandated slot-filling order or skipping a required BIOS update that enables the correct SPD timings for 1Rx8 registered modules. Consult the MZ33-CP1 manual for the exact population sequence before seating the DIMMs.

Fordele

  • 32 GB kit lets the MZ33-CP1 run at full 5600 MT/s rated speed
  • Registered ECC design corrects single-bit errors on the fly for data integrity
  • 1Rx8 organisation matches the board's memory controller for reliable full-capacity operation
  • 288-pin RDIMM form factor fits the server motherboard's DDR5 slots exactly
  • 1 V DDR5 modules draw minimal power while delivering PC5-44800 bandwidth

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I pick the 32 GB 2x16 GB kit or a different capacity for my GIGABYTE MZ33-CP1?

The 32 GB kit (2 x 16 GB) matches the board's DDR5 5600 RDIMM population rules; verify your manual for approved DIMM order and maximum capacity before buying.

What does the 5600 MHz rating mean once the modules are installed in the server?

The memory controller will recognise the kit at its rated DDR5 5600 speed and run it at CL46 1.10 V without manual tuning.

How does the 288-pin RDIMM interface limit what I can install on this motherboard?

The board requires 288-pin Registered DDR5 RDIMMs; UDIMM or SODIMM modules will not fit or function.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.