Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green SODIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 1.1V 262-Pin SODIMM Supermicro X14SAV-TLN4F memory upgrade

SKU CH-9S3W-PYFRF

A 32 GB dual-channel DDR5 SODIMM kit running at 5600 MHz with CL46 latency, 1.1 V operation and 262-pin unbuffered design validated for the Supermicro X14SAV-TLN4F motherboard

  • Capacity32GB (2 x 16GB)
  • Type262-Pin DDR5 SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB kit gives headroom for heavy workloads
  • DDR5 5600 speed feeds data to the CPU faster
  • CL46 latency and 1.1 V keep timing tight and power low
  • 262-pin SODIMM form factor fits the Supermicro X14SAV-TLN4F slot exactly
  • Major OEM chips from Samsung, Micron or Hynix tested at rated specs

Exact-match DDR5 SODIMM kit

This 32GB kit contains two 16GB DDR5 5600MHz modules built to the PC5-44800 standard. They are 262-pin non-ECC unbuffered SODIMMs rated at CL46 and 1.10V, designed for the Supermicro X14SAV-TLN4F motherboard.

Sustained-load behaviour

Major OEM chips from Samsung, Micron or Hynix are tested at the rated speed, timing and voltage for stability under continuous workloads. The 1Rx8 rank structure matches the memory controller expectations so the system recognises the full capacity without down-clocking.

Pre-order checklist

Verify the motherboard manual for supported capacities, approved population order and installation steps before purchasing. This kit uses the 262-pin SODIMM form factor required by the platform, not a desktop UDIMM, and requires DDR5 slots.

Fordele

  • 32 GB kit gives headroom for heavy workloads
  • DDR5 5600 speed feeds data to the CPU faster
  • CL46 latency and 1.1 V keep timing tight and power low
  • 262-pin SODIMM form factor fits the Supermicro X14SAV-TLN4F slot exactly
  • Major OEM chips from Samsung, Micron or Hynix tested at rated specs

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS44800-618K2
Capacity32GB (2 x 16GB)
Type262-Pin DDR5 SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does the 1.1V DDR5-5600 kit run hotter or draw more power than standard JEDEC modules during continuous workloads?

The kit operates at the standard 1.1V DDR5 voltage and CL46 timing, so power draw and thermals match the JEDEC baseline for 5600 MT/s SODIMMs.

My Supermicro X14SAV-TLN4F has only SODIMM slots — will these 262-pin modules fit without an adapter?

Yes, the 262-pin SODIMM form factor is exactly what the X14SAV-TLN4F requires; no adapter or desktop UDIMM conversion is needed.

Can I keep my existing 16 GB DDR5 stick and add this 2x16 GB kit for 48 GB total?

The board's memory-population rules determine mixed-capacity support; consult the system manual for approved configurations before mixing ranks or capacities.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.