Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board with black memory chips, no heat spreader, 288 gold pins along the bottom edge

NEMIX RAM

NEMIX RAM 32GB DDR4 2933MHz CL21 2Rx8 1.2V 288-PIN UDIMM memory upgrade

SKU CH-3JKW-XS09W

32 GB DDR4 2933 MHz CL21 2Rx8 1.2 V 288-pin UDIMM upgrade for Supermicro X12SCZ-F / X12SCZ-TLN4F motherboards

  • Capacity32GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo
  • Exact-match 32 GB DDR4-2933 CL21 for full rated speed
  • Verified fit for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards
  • Built with major OEM Samsung, Micron, Hynix chips for tested reliability
  • 2 V 288-pin UDIMM 2Rx8 Non-ECC matches board requirements
  • Lifetime replacement warranty with free US-based technical support

Exact-match 32 GB DDR4-2933 UDIMM

This 32 GB DDR4-2933 (PC4-23400) module is built for desktop systems that require a 288-pin unbuffered non-ECC DIMM. It operates at 1.2 V with a CL21 latency and a 2Rx8 rank configuration using major OEM DRAM chips.

Builders upgrading Supermicro X12SCZ-F

The kit is validated for those specific motherboards and will not suit systems that need ECC registered modules, SODIMM form factors, or a different DDR generation. Buyers who want more capacity per slot or registered server memory should look at other options.

Verify manual for population rules

Check your motherboard manual for supported DIMM capacities, approved population order, and installation steps before ordering. Confirm the board accepts 2Rx8 unbuffered non-ECC UDIMMs at the rated speed and voltage.

Fordele

  • Exact-match 32 GB DDR4-2933 CL21 for full rated speed
  • Verified fit for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards
  • Built with major OEM Samsung, Micron, Hynix chips for tested reliability
  • 2 V 288-pin UDIMM 2Rx8 Non-ECC matches board requirements
  • Lifetime replacement warranty with free US-based technical support

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-328K1
Capacity32GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

Spørgsmål om denne vare

Does this 288-pin DDR4 UDIMM need an open DIMM slot on my Supermicro X12SCZ-F motherboard?

Yes — it installs in any free 288-pin DDR4 UDIMM slot on the X12SCZ-F or X12SCZ-TLN4F board.

Will this CL21 2Rx8 module run alongside my existing DDR4-2933 sticks?

It will; the board will train all modules to the lowest common speed and timing, so your current DDR4-2933 kit stays stable.

How do I confirm the kit is recognised at 32 GB and 2933 MT/s after install?

Check the BIOS memory summary or OS task manager — both should show 32 GB total capacity and a 2933 MT/s data rate.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.