NEMIX RAM
NEMIX RAM 32GB DDR5 4800 CL40 2Rx8 1.1V UDIMM SuperMicro memory upgrade
A 32 GB DDR5 module running at 4800 MT/s with CL40 latency and 1.1 V operation, built for Supermicro desktop and workstation boards
- Capacity32GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32GB capacity expands system memory for demanding workloads
- DDR5 4800 speed delivers high data transfer rates
- CL40 latency supports responsive operation at rated frequency
- 1V operation reduces power draw versus higher-voltage modules
- 2Rx8 dual-rank organisation increases memory density per slot
SuperMicro DDR5 4800 upgrade
This 32 GB DDR5 4800 module targets Supermicro desktops and workstations needing a single-slot capacity increase. It runs at 1.1 V with CL40 latency and uses unbuffered 2Rx8 chips from major OEM suppliers. The 288-pin UDIMM fits standard DDR5 desktop sockets without ECC or registered signalling.
Replacing slower DDR5 or adding first stick
The jump is worthwhile when your board supports DDR5 4800 and you need more capacity than the current single module provides. Moving from a lower-frequency DDR5 stick or filling an empty slot lets the memory controller run at its rated 4800 MT/s without downclocking.
Fits standard DDR5 UDIMM slots
The module needs a desktop board with 288-pin DDR5 UDIMM sockets and a CPU or chipset that accepts 1.1 V non-ECC unbuffered memory. It frees a second slot for future expansion while delivering 32 GB in one stick. No heat spreader is included so clearance is minimal.
Fordele
- 32GB capacity expands system memory for demanding workloads
- DDR5 4800 speed delivers high data transfer rates
- CL40 latency supports responsive operation at rated frequency
- 1V operation reduces power draw versus higher-voltage modules
- 2Rx8 dual-rank organisation increases memory density per slot
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-328K1 |
| Capacity | 32GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM |
Spørgsmål om denne vare
Will this 288-pin DDR5 UDIMM fit a standard desktop DIMM slot?
Yes, the module uses the 288-pin DDR5 UDIMM form factor that matches standard desktop DIMM sockets.
What is the correct orientation step when inserting this CL40 module?
Align the single notch on the 288-pin edge connector with the slot key, press down evenly until both retention clips click into place.
When should the 32GB 2Rx8 module be replaced?
Replace it only if memory diagnostics report errors or the system becomes unstable; otherwise DDR5 modules have no scheduled replacement interval.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



